Advice required for sound system for LC80

[capsat]

@sameerulhaq064 the dia of speakers in the LC 80 series 1994 6 1/2" will fit in the front door panels, but 5 1/4" is the largest the rear door panel cutouts will accept. That applies to all four doors without modifications. You can get 6 1/2" speakers in the rear doors, if you're wiling to cut both the sheet metal and door trim (panel). Depth is a concern for the front speakers, because of the clearance between the dash pad lower corners and the door trim.

[sameerulhaq064]

Thank you very much. I'll be going to a friend's shop and will check the types of speakers that will fit. Will update here.

[capsat]

you may use a JBL component system from US variant 120 series as plug n play into the existing slot
say thank you to @HanifBhatti

[Rahat083144]

Not sure about the factory head unit or other requirements of 80 Series system, but for starters a simple swapping of factory speakers with any decent speakers will make a world of difference, especially if there is some crafty sound deadening/absorption involved. And of course you must go with components, at least at the front.

[sameerulhaq064]

The stock speakers were changed back in 2016. Now I want something beefier.

especially if there is some crafty sound deadening/absorption involved.

Yes, I plan to install sound deadening sheets in the doors.

And of course you must go with components, at least at the front.

Yup, installing components in the front. If there's space, will install components in the middle row roo. Otherwise coaxials will do.

[Rahat083144]

OR you could install the speakers on the door cards instead of the door frame (like Tintin bhai) for the best sound.