Alto is Reborn: Complete swap with a JDM

Technical Forums

D.I.Y Projects

Tags: #<Tag:0x000000091cbb60>

salmankhan_627 (salmankhan_627) 2014-12-26 13:38:12 +0500 #81

I already have talked to him, will do so again

z0haib (z0haib) 2014-12-26 15:05:23 +0500 #82

lovely outcome bro (Y)

dr3vil (Maalik ) 2014-12-26 15:37:04 +0500 #83

contact me any time

sent from an evil cell phone

umikhan2013 (umikhan2013) 2014-12-26 16:09:03 +0500 #84

bro how much the all changes costed to you ... can you share the price of every single thing

addeology (addeology) 2014-12-26 17:47:53 +0500 #85

I watched engine movie. Its great. Make another movie in light.its too darkness. Also test on long n see its max speed.mine on this engine touched 135 max.

addeology (addeology) 2014-12-26 17:49:03 +0500 #86

Try to install ecu inside the car.its so vulnerable outside. I did for mine n its realy peace of mind

addeology (addeology) 2014-12-26 17:50:39 +0500 #87

I hate this lowering thing now. Kissing dust on every speed breaker. Shd uv sm height.remember we r living in Pakistan.

salmankhan_627 (salmankhan_627) 2014-12-27 04:13:18 +0500 #88

Thanks bro

salmankhan_627 (salmankhan_627) 2014-12-27 04:13:42 +0500 #89

I will

salmankhan_627 (salmankhan_627) 2014-12-27 04:14:56 +0500 #90

I will make another video with some good camera and another one of 0-60 as well. I tried it on the highway and it goes to 120 max.
My engine is slightly different from yours.

salmankhan_627 (salmankhan_627) 2014-12-27 04:15:51 +0500 #91

I don't want to cut the wiring, this is how the company fits it and I'll go with that. You know how much GENUINE things are worth in our country lol

salmankhan_627 (salmankhan_627) 2014-12-27 04:16:40 +0500 #92

have changed the springs again as the car wasn't drive-able, now its back to stock height.

salmankhan_627 (salmankhan_627) 2014-12-27 04:29:39 +0500 #93

Below is the breakdown of the project:

Engine, Transmission, Fuel pump, Radiator and fitting: 40k
Dashboard, wiring, AC, Heater, Battery plates, Brake servo, Pedals, Power Stearing, Speed meter having RPM (stock in nose cut wasn't), Vipers with motor and rods, Pani wali motor with bottle: 25k
Front suspension complete, Axels, Hubs (Taway), Break pads, Clippers: 10k

Fitting of all these extra things: 10k (electrician + mechanic and two cars were dismantled and one was made)

This doesn't include price for stuff like bulbs, LEDs Horns, small denting, bumper adjustment, drop (spring change), Oils and filters etc.

I gave all the old stuff away as it was in poor condition though still have the option to use anything from that and each and every thing from the front of the car has been changed including the tiniest of bolts.

ali.7861 (Ali Haider) 2014-12-27 04:54:21 +0500 #94

salmankhan_627;4646315:

Below is the breakdown of the project:

Engine, Transmission, Fuel pump, Radiator and fitting: 40k
Dashboard, wiring, AC, Heater, Battery plates, Brake servo, Pedals, Power Stearing, Speed meter having RPM (stock in nose cut wasn't), Vipers with motor and rods, Pani wali motor with bottle: 25k
Front suspension complete, Axels, Hubs (Taway), Break pads, Clippers: 10k

Fitting of all these extra things: 10k (electrician + mechanic and two cars were dismantled and one was made)

This doesn't include price for stuff like bulbs, LEDs Horns, small denting, bumper adjustment, drop (spring change), Oils and filters etc.

I gave all the old stuff away as it was in poor condition though still have the option to use anything from that and each and every thing from the front of the car has been changed including the tiniest of bolts.

Stock wheels and side mirrors are looking ugly
Door covers (Ghatta) change then with JDM Cover plus they have Power windows and Power mirrors switchs
Some Good looking 13" inch alloys

BaloCh SaaB

salmankhan_627 (salmankhan_627) 2014-12-27 05:03:06 +0500 #95

yes they are but I am out of cash as originally my only plan was to change the engine and transmission with a budget of 40k lol
I will continue the project for the looks of the car soon

ali.7861 (Ali Haider) 2014-12-27 05:08:41 +0500 #96

You can start it slowly so you can install them one by one

BaloCh SaaB

formula2012 (formula2012) 2014-12-27 14:44:58 +0500 #97

nice project , i was thinking to do same with my alto , do you have any idea of non turbo engine prices? is it less in price?? and how much did you get for old engine,gear,cng kits cylinder???

sial_ali (sial_ali) 2014-12-27 15:35:19 +0500 #98

is g13b a bolt on fit for alto ?

dr3vil (Maalik ) 2014-12-27 15:38:09 +0500 #99

aap ki aur meri soch kafi milti hai
alto with 4 ppl and then it is dhuz dhuz grabbb

addeology (addeology) 2014-12-27 17:12:48 +0500 #100

@ek exactly. I had 4 guys on my last tour to motorway.on return frm GT road, it was realy heartbreaking.