Anda charade LED TAIL LIGHTS

[DANY_KHANN]

so you saying that can b bought

ohh yeah it can bought easily from the same shop you buy Led's it's kind of a holder which keeps the LED is place. you may have noticed the chines key chains with a small torch that have only one LED same like that one.

[DANY_KHANN]

u can use mirror paper for reflection...i'll use the reflectors of led emergence light(china wali) when i'll make the rear light..rght nw i'm working on indicators

https://www.pakwheels.com/forums/d-i-y-projects/180571-khyber-led-front-bumper-indicator-light

i don't think so that a mirror paper will work. It will scatter the light.

[sheazi]

mirror does reflect a bit rather than using ntthing...dats y i'll use the lence in led battries when makin brake light insALLAH

[umair911]

yar if u want to add LEDs as brake lights then make it look somthing like this.........
PARKING


BRAKE



If u want just brightness then dnt use LEDs just place LED bulb in place......Koi faida nahin itne sare LEDs install karna ka

[umair911]

If u want i can help u with designing......just mail me ur car's rear light Pix

umair.rox.911@live.com

[mehran]

@idm4632
Sir, really impressive work on the indicator. Waiting for pics of the rear lights. I hope you are taking ideas about LED layout within the light housing from internet too. Good job!

And I think your hairdo is really kool too! (H)

[idm4632]

@ sheazi
bro where do i get that reflecting paper
@ umair911
dear i hv postponed the design phase due to low quality leds and as sheazi said bout these and where is design is concerned so what i did on that board was an experiment of using single diode for parking as well for brakes and one issue more i m looking for china lite covers for this project and the design is not final yet but i'll send u pic of charade rear light for ur assistance and till this point thank u so much you and sheazi.

[umair911]

reflecting is more of reflection sticker.........if u dnt want this then u can do is put normal tape where u want light to be reflected and paint it with chrome spray pain........it will give u same effect as reflecting paper/sticker

a sample of wat i did to the headlights of Khyber

[UJ_36]

Great efforts....

[wala]

Dude, Nice effort, But you placed the leds on there wrong side of VERO BOARD.... the copper tracks on the opposite sides are there for a reason... So that you dont have to use wires to connect the leds...

[wala]

Assalam o Alaikum !
This project i started on November 13 , 2011 at 3 pm by reading the thread of umair who created khyber tail lights in the same thread fas133 gave an idea of using same leds for parking and brake too and i went to college road 2day n buy all needed stuff for this project before going there i went to saddar babu bazar nd asked for led lights n the guy there ask 4000 PKR for my car lights nd indicators ok now here is the list what i bought 2day for this
1. 100 leds (60 red & 40 yellow)
2. Resistors ( 1 ohm & 100 ohm)
3. soldering wire
4. board
5. wire.

now i started joining leds

here i place the board in the indicator for fixing measurements

here is the result nd one thing more i also polished the indicator cover with compound polish

and the next coming pictures are of the tail lights

Dude, Nice effort, But you placed the leds on there wrong side of VERO BOARD.... the copper tracks on the opposite sides are there for a reason... So that you dont have to use wires to connect the leds...

[x-auto]

I am thinking of doing this with my FX back-lights and front bumper indicators.... KooL...

[kamii1]

Assalam o Alaikum !
This project i started on November 13 , 2011 at 3 pm by reading the thread of umair who created khyber tail lights in the same thread fas133 gave an idea of using same leds for parking and brake too and i went to college road 2day n buy all needed stuff for this project before going there i went to saddar babu bazar nd asked for led lights n the guy there ask 4000 PKR for my car lights nd indicators ok now here is the list what i bought 2day for this
1. 100 leds (60 red & 40 yellow)
2. Resistors ( 1 ohm & 100 ohm)
3. soldering wire
4. board
5. wire.

now i started joining leds

here i place the board in the indicator for fixing measurements

here is the result nd one thing more i also polished the indicator cover with compound polish

and the next coming pictures are of the tail lights

can you please tell me that how did you connect the led. like in series or parallel ? how did u connected the resistors