Any car audio problem, I can help. (Part 2)

[madhouse12]

I have pioneer carrozzeria eq-66 equalizer unit, made in Japan.
I need wiring diagram.
It has two 8 pin male type sockets marked as front and rear and few separate wires probably for power.
Any help would be greatly appreciated!

post pics of the player

[subhash31]

post pics of the player

I have just attached the pics.
It says "computer controlled graphic equalizer and spectrum analyzer"

[madhouse12]

I have pioneer carrozzeria eq-66 equalizer unit, made in Japan.
I need wiring diagram.
Ie: how to connect it to a head unit and the relevant purpose of the outside connectors not internal circuit.
It has two 8 pin male type sockets marked as front and rear and few separate wires probably for power.
Any help would be greatly appreciated!

u want the DIN pin diagram or the power wire diagram?

[subhash31]

u want the DIN pin diagram or the power wire diagram?

I need
1. How to power up (You can see that combined 5 wires and a single wire)
2.How give the input to the unit
3.how to get out put from the unit
4.PIN value of each 8 pin male sockets
5.Value/diagram for those six wires (five in one combined wire+ single separate wire)
6.How to do remote power on (power on only the HU is ON)
7.Is it possible to connect it to Pioneer DEH 1550 HU
8.Is there any default HU which originally came with this unit so it would be a plug and play with that HU
9.If not which is the best unit to combine with this EQ 66
10. Does it have built in amp- it has two button named as "dual amp balancer"

[saadsmalik]

I'm looking for a tiny little subwoofer for my Cuore. Ideally, I would want to install it on the rear 'phatta' because I don't want to lose boot space (the car is not on CNG). I've searched Hall Road but they don't have anything smaller than 12 inches. The ideal size for me would be 6 inches. Is such a small size even available?

Also, I currently have a Pioneer player (CD, USB, iPod, don't remember the exact model) and I have two speakers at the back directly connected to the player, in addition to the stock front speakers. I'm happy with the current setup, just want to add a little bass. Should I consider an amplifier too? Or would a woofer work okay directly connected to the player? The player does have subwoofer output.

Thanks in advance!

[madhouse12]

here is a wiring dia for you

getting it to work with your HU will be tricky. i need to see its manual before i can say sthg

[subhash31]

here is a wiring dia for you

getting it to work with your HU will be tricky. i need to see its manual before i can say sthg

Thank you very much madhouse12!!!!!
Please do me another lil help.
Please send me a line diagram or above with bit larger letters because it is not very much clear when zoomed up.
I do not have the connector plug in that combined wire, if possible let me know the value of each little wires (you can see it in my attached pic) so that I can get new plug and solder it accordingly.
What are the specific names (with codes) for those female type connectors?
Many thanks again!!!

[madhouse12]

they are called 8 pin din type connectors. google it and you will get lots of pics for it

[subhash31]

they are called 8 pin din type connectors. google it and you will get lots of pics for it

Yeah but they give different types of pin values.
In my case, if you could provide me a bit larger pic it would be really nice!
Thank you very much.

[madhouse12]

i am afraid this is all i got. got this pic from the net. these type of dsp usually come with their own compatible players. this will need jugar to work with your player (if it is even possible)

[subhash31]

i am afraid this is all i got. got this pic from the net. these type of dsp usually come with their own compatible players. this will need jugar to work with your player (if it is even possible)

I will try my best and let you know as well probably at the end of this month!
Anyway I first thought you too own a EQ66 by looking at that pic.
Thank you very much for the support.

[ahmadmir]

Help!
Amp keeps going into protection mode whenever i start a song any ideas?
Wiring is not the problem. Checked it with an another amp.. worked fine!

[Bad_Cheetah]

Help!
Amp keeps going into protection mode whenever i start a song any ideas?
Wiring is not the problem. Checked it with an another amp.. worked fine!

Check the gains on the amp, they must be too high. If thats not the issue then the amp might have some internal issue.

[ahmadmir]

Yea thanks! Just got it fixed abhi abhi! internal fault. Thanks!

[awais.9]

right side front component has no sound from quite some time what can be the issue?

Sent from my Nexus using Tapatalk 2

[Bad_Cheetah]

right side front component has no sound from quite some time what can be the issue?

Sent from my Nexus using Tapatalk 2

Check that sides wiring connections with amplifier and xover.
If it is just the mid-bass that is not working, then i'm sure it must be corroded wire which would need replacement in the door.

[devils_smile]

right side front component has no sound from quite some time what can be the issue?

Sent from my Nexus using Tapatalk 2

check the

1) Settings from the pre (fader/balence)
2) Check for loose connections on the speakers/pre/amp
3) There could be a problem with the speakers itself

before u jump to the 3rd conclusion, try swapping the speaker that isnt working with one of the speakers that is. See if its working there. If it is, that means the problem is with ur wiring.

[awais.9]

i have checked from pre already where u can turn off front or rear speakers
rest for wiring i have no idea and amp is between back seat and cng cylinder
i thought to get an idea before i go to market to get it checked

[subhash31]

I have PIONEER KEH-P8650.
Luckily I got all kind of manual this time.
But another problem here!
I check the unit by only giving power (red and Orange for positive and black for negative) to the unit and it seems ok but display is very dim.
According to manual it has a another power line (yellow) to be connected to head light switch (??for dimming the display at night when lights are on).
When I gave the power to yellow wire with other two wires the display almost switched off but other lights are ok.
According to manual there is option to switch off dimming but that menu doesn't appear during the checking.
Is this due to something wrong with the unit? or something wrong with my checking? (I only gave the power no audio/antenna/cd/cassette)
(https://www.pakwheels.com/forums/car-audio-video-electronics/145918-my-orginal-pioneer-carrozeia-made-japan-ready-sale)
Above link has the same unit

[IbrahimXaheer]

i am trying to attatch an aux input in the IN_DASH belta cd player

it has a connector for cd changer ...i have found out that the pins are for

but the pre doesnot seem to detect the input

it is a mute input that is probably used by the pre to detect if there is a an input signal

the TOP LEFT Connector

can u help me trick the player into thinking that a cd changer is connected

also got detailed info from this