Ask Xulfiqar - An Automotive Encyclopedia

[capsat]

it is simple DIY if you can do it at home -

[abdul-rafay]

no one seperately sells the controller, so bought the whole module and installed it and to get it paired i went to the electrician you are reffering he showed me on the scanner that this new abs is showing the same code U0073 communication error.

[abdul-rafay]

none of the so called experts in the market are able to catch the fault and just make assumptions that replace your ecu or abs controller or this or that. On showing them the video they say ok lets replace the whole module. I say go ahead replace it but they just could'nt fix it even after a replacement.

[capsat]

do u have the spare ABS unit as well - ?

[abdul-rafay]

no i returned it from where i bought

[capsat]

after swapping the ABS the ecu need to be reset by removing battery terminal, for 10 minutes - connect the battery terminal start the engine and let engine idle for 5 minutes. shut down & rescan., at times after replacement of any electrical unit error appear from Stored HISTORY

remember NOT EVEN TOYOTA PAKISTAN have refresher workshops and sharing of fault diagnostics rectification bulletins with the authorised 3S

all work is done on TUKKA .. and parts from SCRAP YARDS. a BMW owner is shy to pay for new parts, so what do you expect ?

we all share from our personal experience & reading over the manuals we grab from any source as tool to learn. nobody is expert so no need to be bitter either, try & appreciate the presence of this forum where we all try to help through Thanks to @HanifBhatti saheb for providing such hub.

[saboor73]

after swapping the ABS the ecu need to be reset by removing battery terminal, for 10 minutes - connect the battery terminal start the engine and let engine idle for 5 minutes. shut down & rescan., at times after replacement of any electrical unit error appear from Stored HISTORY

remember NOT EVEN TOYOTA PAKISTAN have refresher workshops and sharing of fault diagnostics rectification bulletins with the authorised 3S

all work is done on TUKKA .. and parts from SCRAP YARDS. a BMW owner is shy to pay for new parts, so what do you expect ?

we all share from our personal experience & reading over the manuals we grab from any source as tool to learn. nobody is expert so no need to be bitter either, try & appreciate the presence of this forum where we all try to help through Thanks to @HanifBhatti saheb for providing such hub.

Ecu doesnt require reset fault can be erased by using scanner also in case of abs ecu is smart enough to pick up things even by just restarting engine

[capsat]

if you can snap clear picture of ABS unit in your car with visible part number please share

[capsat]

Ecu doesnt require reset fault can be erased by using scanner also in cases of abs cases ecu is smart to pick up things even restarting engine will erase error if fault is fixed

not applicable in Pre-2010 vehicles. Yes Scanner can erase but i doubt if it has happened in this case

[abdul-rafay]

Got it erased by the scanner but after a few jerks the light came back. Will share the pictures of the abs module. It is an x9 abs.

[abdul-rafay]

Part no. 44510-33130 x9
to attach picture

[capsat]

you may try a electrical contact cleaner [ not wd-40 ] over the abs connector and corresponding electrical plugs / grips., only if it happens after bumps & jerks ?

[abdul-rafay]

Will ask my electrian to remove each n every grip and i myself will clean it using a contact cleaner

[asharab.butt]

Brothers this is what is happening to the screen on my altis 1.6 pre fl the reverse camera works but other than that the screen stays black plus radio and the buttons work like volume and i am even able to change the radio station but it stays black. Ive tried to reset the system but to no use.

[capsat]

the module array processing the application display has gone kaput, claim under warranty or replace at own expenses.

[asharab.butt]

Replace the whole unit or just one part it something. And can you give me an idea of the warranty? And idea of expense if it is not under warranty now? Thanks for your reply

[asharab.butt]

When i turn it on it shows this but then goes black like i mentioned.

[abaid1019]

Salam Everyone.
I have small issue. I have honda civic 2008 known as Reborn.
When I accelerate the speed I feel Vibration in engine which I can feel sitting the car. The car will not pick up the speed also. Its like engine is braking and won't able to accelerate the car.
If I put little more pressure on the pedal then it will accelerate.
Any Idea about the problem or issue, please guide me what to do.
JazakAllah.

[asharab.butt]

So it turns out the warranty is until 24 months or 50k kks none of which are completed but the problem i have us the car had a tracker installed until a few days ago will that affect the warranty.

[saboor73]

Salam Everyone.
I have small issue. I have honda civic 2008 known as Reborn.
When I accelerate the speed I feel Vibration in engine which I can feel sitting the car. The car will not pick up the speed also. Its like engine is braking and won't able to accelerate the car.
If I put little more pressure on the pedal then it will accelerate.
Any Idea about the problem or issue, please guide me what to do.
JazakAllah.

Auto or manual?