Ask Xulfiqar - An Automotive Encyclopedia

[Xulfiqar]

either the engine is out of time or super leaned out.

[ibaloch777]

Please elaborate in non technical language.

[pwuser158913575038]

It means that either the engine timing is not correct and needs to be adjusted or the engine is not getting enough fuel. Both of the things need to be checked and adjusted.

[pwuser161208209831]

Xulfiqar bhai, my civic 2018 is not starting up. I am posting a video from YouTube here. It's doing the exact same thing. I haven't tried starting it in neutral though. Is it battery or something else? And if battery, which one would you recommend?

[capsat]

how old is the battery in your car. If it is over 10 months old it is time to change and get new one. In case battery is not that old and starter motor come to life at shifter position change, time to visit a workshop for shifter assembly electrical inspection.

[pwuser161208209831]

Sir the battery is like 2 years and 9 months old.

[capsat]

Get a New Battery. problem will be resolved.

[1mran]

@capsat @Xulfiqar
I got my Honda civic exi 2005 clutch set replaced (fcc japan), the work was done by the mechanic who has worked 7-8 years in Honda. ------ the issue is that the clutch is still hard, what could be the possible reasons for this?

Regards.

[capsat]

@Hassan1991

4 wheels with a honda monogram are lawn mowers which are automatic am not sure what you are referring to sir
@1mran

[1mran]

Brother I am saying that the clutch pedal is hard though I have replaced the clutch set.

[capsat]

Did you change the thrust bearing as well? you may need to adjust clutch cable am not sure if honda with a 4 wheel have hydraulic or mechanical cable type clutch. am sorry

[1mran]

Ye
Yes clutch plate, pressure plate, bearing ---- it's hydraulic.

[Xulfiqar]

replace the flexible hose on the slave cylinder and flush out the old brake fluid from it too.

[Hassan1991]

As Xulfiqar sir said. Flush the oil.
Check master cylinder and slave. Worn out cylinder seals can cause clutch to get hard.

[1mran]

I was very disappointed by the mechanic (though he has professionally worked in Honda), I kept telling him that the pedal is hard, it didn't made any difference after the replacement, but to no avail.

Now I will take the car to another mechanic who looks after my Suzuki Mehran 2004 ( I am very satisfied with him)

He listens to your problem carefully, I will read out your post to him+ if there's anything else to check beside what you said, plz add --- I will.visit him tomorrow.

One guy gave me the theory that it's not genuine but fcc Japan, I didn't buy this theory as fcc Japan makes genuine parts (as far as i know)

Regards.

[1mran]

InshaAllah I will.
your posts were helpful in the past for me.

Regards.

[Xulfiqar]

there is also a possibility you installed a harder spec pressure plate.

[1mran]

didn't get this point,
I mean I just went to one Honda shop and asked him for exi 2005 clutch set, didn't knew there's.different spec.

[am.packages]

@Xulfiqar sir can i use this in my corolla gli 2010 model 215k odo,i m using now 10w40, now engine is consuming half liter oil in 3500-4000 km,so i want to change oil grade,guide plz,thanks

[joshuaelijah05]

This post was flagged by the community and is temporarily hidden.