Attention is invited

[saam596]

AOA...!
Hello Brothers, hope all fine.
Recently i bought Indus Corolla 1994.

Keeping in mind the potential , durability of the car with engine , what would be the best possible swap along Transmission.

few engines i will name which i have considered but before going for final step i would like if someone gives a brotherly and expert opinion here.
1) 7A
2)3S-ge or 3s-Fe
3)4A (Blacktop) ** not my favorite though, due to parts **
4) 2ZZ-ge vvtl-i

if anyone has a better option to advice, i will welcome it .
kindly do write what possible alteration will be expected that will effect the suspension , Mount/foundation etc.
Regards

[mehrozniazi1]

3sge beams or 2zz .. .. 4age is perfect swap but this engine is very rare now in good condition

[saam596]

3sge beams or 2zz .. .. 4age is perfect swap but this engine is very rare now in good condition

@ Rozz
How easily will 3sge or 2zz sit in the engine bay, as these engines have heavy/bigger blocks , correct me if i am wrong.
also how will it effects the suspensions and foundations.
what suspension will suit either swap.

[saam596]

I think Pakwheel Veterans now a days busy in waiting for new models
thought i will get some experimented ideas :S

[saam596]

i see non of the Expert is willing to give his opinion, my forum is dying . i am waiting for some attention on this topic.

[aamirahsan89]

well let us begin, for starters, why do you want a swap, is this a project car? if so, whats the basic purpose of it and what is going to be its usage, weekend or daily? are you looking for reliability, performance or a bit of both? is funding an issue?

[DrUsmanNawaz]

@xulfiqar can suggest u something special about this...

[saboor73]

2zzge is not ideal for daily use as its a high revving engine with almost no torque and low rev on high ways it pretty fun to drive but keep in mind its not economical at all 3s will be a big and heavy engine 7afe is very nice option IMO lot of lower end torque

[saam596]

this car has a daily use almost, but no rough use. its in a safe caring hands. Budget is not a problem for swapping engine. but yeah due to some crisis i cannot go for new car at moment. So i want to upgrade it with best possible, suitable option now a days available.
" 3s " i know have a big heavy block, but somewhere i heard the Beam or ge version was lighter about 185 kg.
2zz is new for me , but may be it matches 4age as no torque and high Hp.
so yeah i like performance and durability both.
so recommend something that has already been experimented and found good

[ab6666]

what about 2nz fe or 1zr fe??

[aamirahsan89]

this car has a daily use almost, but no rough use. its in a safe caring hands. Budget is not a problem for swapping engine. but yeah due to some crisis i cannot go for new car at moment. So i want to upgrade it with best possible, suitable option now a days available.
" 3s " i know have a big heavy block, but somewhere i heard the Beam or ge version was lighter about 185 kg.
2zz is new for me , but may be it matches 4age as no torque and high Hp.
so yeah i like performance and durability both.
so recommend something that has already been experimented and found good

Is this currently a 4afe? The gli

[saam596]

Is this currently a 4afe? The gli

it is 5A with Auto transmission

[aamirahsan89]

it is 5A with Auto transmission

Why not consider that, it's economical, quicker than most things on the road and it should fit in perfectly

[shabbir.53]

For trouble free service, just overhaul your engine, if that is not a problem and if it needs an overhaul.

[s15]

Keep it stock or keep the alterations minimum possible, you will not regret it in long term [emoji4].

[saam596]

So in-fact the soul purpose is to know whether these heavy, powerful engine are suitable for swap or not.
my current engine is 5A with Auto trans as i already mentioned, How much Power i can actually pull out of it keeping it in original state ?
i did installed 4-2-1 Gt exhaust headers with 2" pipe .
i am actually in pursuit to know , does the car lost its strength by putting up any of these engines or not.
i remember i meet a guy who use to run 4age on CNG

[ahmed2396]

7AFE...!! 2ZZ is not a sensible swap.

[saam596]

7AFE...!! 2ZZ is not a sensible swap.

i am now focusing on 7A-FE unless someone come up with better option,
As i know 7A and 4age uses same block but difference in connecting rods etc, so does the output .
but anyone out there has tasted 7A-FE btw ? its a matter once done cannot be undo. so kindly be open

[saam596]

7AFE...!! 2ZZ is not a sensible swap.

i am now focusing on 7A-FE unless someone come up with better option,
As i know 7A and 4age uses same block but difference in connecting rods etc, so does the output .
but anyone out there has tasted 7A-FE btw ? its a matter once done cannot be undo. so kindly be open

[ahmed2396]

i am now focusing on 7A-FE unless someone come up with better option,
As i know 7A and 4age uses same block but difference in connecting rods etc, so does the output .
but anyone out there has tasted 7A-FE btw ? its a matter once done cannot be undo. so kindly be open

Vaqas had it in his AE100, 7afe got pretty decent low end torque.