Baleno Water leaking from below engine belt

[biker2]

I am facing a problem that i need to add a lot of water like 2-3 litres of water on daily basis
i am not experiencing any heating problem at all though i drive it on AC too but still temperature needle is always on middle (Indicates normal temp )

today i inspected again and saw water dropping from below the engine somewhere near the pulley belt of engine.
cant trace the exact source but the water is dropping from below engine belt side near right front tire.

Is it waterbody pump prblem?is yes then how much cost will be incurred?
if no then whats the possible cause?

kindly guide me on this

kindly help me
JazakALLAHu Khairan

[Tabish1]

Check Radiator Guy... As Soon As Possible

[capsat]

if you've been using tap water the water body (combination of water pump & intake metal pipe) corroded. Most likely there are tiny holes in water intake metal pipe and when engine is stopped water seepage occur.

after rework on water body kit flush the system and use a good quality coolant mixed with distilled water.

[fas133]

As per your description seems to be water body pump leakage.

[dr3vil]

Water body that's what mechanics call it

[onlyfaith]

the easy thing first

1)plz check the pipes connected to radiator ( in and out) all the way to origin and insertion)

2)the radiator

3)if they are OK then check the water body/water pump

[Shery_786]

Its water body for sure bro, coz i was also facing the same problem with my cultus and replaced the water body which costs me PKR 1500.

[Sharo53]

i was suffering the same problem...and finally changed the water-body 3days ago...it was corroded and their was a tiny hole in it...and the real surprising thing is "i was using coolant in that car" and still it corroded

[biker2]

Thanx alot guys.
I too think its a waterbody problem.i will get it checked today and inshallah will get it done.

How much time it takes to change waterbody?
any idea about the price of waterbody for baleno?

[Xulfiqar]

i was suffering the same problem...and finally changed the water-body 3days ago...it was corroded and their was a tiny hole in it...and the real surprising thing is "i was using coolant in that car" and still it corroded

most probably it corroded because of cavitation. Was the impeller a metal fan type or a smoothly shaped cast iron disc?

[Skill]

Thanx alot guys.
I too think its a waterbody problem.i will get it checked today and inshallah will get it done.

How much time it takes to change waterbody?
any idea about the price of waterbody for baleno?

water body is around 1000 to 1500 aftermarket and 3s price will be too much high.