Battery

xubex.04 (Muhammad Zubair) 2020-06-01 01:06:24 +0500 #1

Dear members,Which battery to be purchased for Toyota Passo 2007.
Karachi,Pakistan.
Thank You.

basitali87 2020-06-01 03:33:02 +0500 #2

For 20 HR capacity of your car's battery, I fear I might not help, however for brand, AGS is the brand to select!

arsal396 (arsalan shaikh) 2020-06-01 13:26:05 +0500 #3

45 amperes battery is enough for your car.. or u can also go for 50amprere

basitali87 2020-06-02 01:15:29 +0500 #4

Yes. I also think that for Passo, 45AH would be fine.

My Vitz reqd. 45AH, then for Passo, I think similar requirements may be there.

Still, its better to confirm.

xubex.04 (Muhammad Zubair) 2020-06-03 06:52:57 +0500 #5

Done with 35 AMP (AGS)

basitali87 2020-06-03 10:31:19 +0500 #6

You made an excellent decision by opting for AGS.

Just use lab grade Sulfuric acid, and 100% pure, distilled water, for making the electrolyte mixture, and you will be good to go. In this way, it might serve you for many many years. IN SHA ALLAH.

basitali87 2020-06-03 10:32:51 +0500 #7

If you have not installed it yet, I would sincerely suggest to go for at least 12V 45AH (20HR) Battery.

arsal396 (arsalan shaikh) 2020-06-03 10:38:51 +0500 #8

its wise decision u made.
for safe side always put jumpers cables in ur car for bad time.

basitali87 2020-06-03 10:42:22 +0500 #9

As per https://abl.atlas.pk/products/?swoof=1&pa_brands=toyota-passo , one battery is being shown which has 20HR capacity as 45AH. Here is the battery's details: https://abl.atlas.pk/product/gl-65/

Other options can be https://abl.atlas.pk/product/gr-65/ and https://abl.atlas.pk/product/mf-65-l/ (its maintenance free battery) but depends on terminal layout of your car.

basitali87 2020-06-03 10:43:55 +0500 #10

Check and confirm the terminal layout too, before installling the battery.

By terminal layout, it means that +ve terminal is on the left side of battery, or right side, when battery's front side is facing you.

xubex.04 (Muhammad Zubair) 2020-06-05 10:13:37 +0500 #11

Sure i will,JazaakAllah For Yor Advice️

xubex.04 (Muhammad Zubair) 2020-06-05 10:14:49 +0500 #12

Thanks,You Are Right,Bad Time Never Informs.

xubex.04 (Muhammad Zubair) 2020-06-05 10:19:35 +0500 #13

Thank You For Important Information,
I Think GR-65 Has Thick Terminals While Mine Vehicle Terminals Are Thin,
Facing Vehicle From Front +ve Terminal is at left and -ve is at right.

brownrose78 (brownrose78) 2020-06-05 11:44:04 +0500 #14

Yes @xubex.04 Zubair bhai, This issue comes when your car's terminals are thin & battery terminals are thick so instead of disturbing car's terminal & wiring, better choose battery with Thin Terminals.

In this regard, compatible Battery options are:

Option# 01: PHOENIX CNG65 Battery Lead Acid Battery (Thin Terminals)
Plates: 11
Amperes: 50 AH
Dimension: 238 x 128 x 228 ( L x W x H )

Option# 02: Daewoo Dry Maintenance Free Battery DL-60 or DR-60 (Thin Terminals)
Plates: 11
Amperes: 45 AH
Dimension: 237 x 128 x 224 (L x W x H)

Option# 03: AGS Lead Acid Battery GL-65 (Thick Terminals)
Plates: 13
Amperes: 45 AH
Dimension: 238 x 129 x 227 ( L x W x H )

For pricing details or buying, you can visit or call Hassan Battery Centre in Gulshan, Karachi with Mobile # 0321-2029273

xubex.04 (Muhammad Zubair) 2020-06-06 11:20:26 +0500 #15

Thank You Bhai For Detailed Information And Help️