Bike was not starting now no power

[tamatar]

I have purchased a used YBR G this month so I am new to this. I have not used my bike for a week, and decided to go on a rid in the morning today.

I entered the key and pressed the self-starter button but it did not start. Battery voltage was 12 but was going up to 9v. And if push the self start button for 3-4 seconds, there was a bzzz noise coming from battery side.

Kick start was/is not working too, but this is the first time I tried so not sure if there is any issue with it.

I plugged in a charger to the battery and charged it for 15 minutes (remoeved bike terminals).

I tried again after charging and I got the same sound, but now there is no power. No neutral lights, no indicator, nothing.

There is a small box adjacent to the battery (starter?), I removed the terminals cleaned some rust and plugged it back again but no luck.

Any idea what to do? I think I should have tried choke the first time it was not starting.

[hamikhan]

Check its fuse & replace if need & use choke in winter mornings don,t use accelerator while starting with kick

[r1]

Used YBR Most probably the battery has completed it's life span, as hami mentioned above do check fuse if its ok then get a new dry battery.

[tamatar]

The kick start is not working.

The fuse is okay. I tried backup fuse.

The battery liquid was empty so I have refilled it and put it on charge.

Is there a circuit diagram for starter solenoid? Or a way to check if its okay?

[tamatar]

Charged the battery and its okay.

If I leave the bike with ignition on + kill switch on, the power comes after some minutes.

The moment I turn on the engine switch or turn on headlight, power goes off again.

I don't know why kick start is not working. Its very smooth no resistance like 70cc.

I will really appreciate some help. Can I show it to a local 70 mechanic?

[tamatar]

The ignition key wire was rusted causing the power cut.

[helper_learner]

Good to hear that your problem is solved