Bixenon FX-R 2.5 projector Retrofit Altis 2012 [In Progress]

[dav111]

Yup, I'm familiar with the concept. I used capacitor when I made a portable charger for iPhoneto smooth the current to the phone. Dunno why I didn't think of it to apply here.

antiflicker ballast also use capacitors in input wires and we can make it of our own my capacitor

[MominHaq]

10k Ohm should be fine?

[nfssaad]

yes... but use the 1 watt resistor...

[MominHaq]

Got it.

[dav111]

What he mentioned is that a capacitor acts as a short circuit for a small period of time when a dc voltage is applied across its terminals. and when its fully charged, it acts like an open circuit. so if you only connect capacitor between +ve and -ve (ground) of battery, for a short period of time you are actually shorting +ve and -ve of battery but if you add a resistance in series, it will protect the circuit from this shortage.

According to my knowledge capacitor is not enough big to short because its capacity will be used constantly and capacitor will get current when headlights are on so power will keep going through it without overcharging and shorting it btw if we add resistance then how should we use resistors and of which value

[rizi_85]

According to my knowledge capacitor is not enough big to short because its capacity will be used constantly and capacitor will get current when headlights are on so power will keep going through it without overcharging and shorting it btw if we add resistance then how should we use resistors and of which value

This the point when capacitor will be short for a short duration of time. If you look into details for how a capacitor works in DC circuits, It will be clear that when voltage is applied across capacitor and current starts to flow, it is short for a short duration, and when it accumulates full charge, its like open circuit. The resistor should be there for protection for that period of time when capacitor is short.

Resistance should be added in series with capacitor as the other member suggested.

[dav111]

This the point when capacitor will be short for a short duration of time. If you look into details for how a capacitor works in DC circuits, It will be clear that when voltage is applied across capacitor and current starts to flow, it is short for a short duration, and when it accumulates full charge, its like open circuit. The resistor should be there for protection for that period of time when capacitor is short.

Resistance should be added in series with capacitor as the other member suggested.

got your point

[dav111]

@mominhaq @rizi_85
after tweaking with shield i got these results from morimoto.check out the color it was 30feet away

[MominHaq]

That looks really cool. At this point I don't want to open my headlamps anymore and I am satisfied with the current output I have.

However if I do another retrofit I'll definitely do the mod.

[rizi_85]

Excellent! please also elaborate what type of modification you did.
The results are very good.

[highroller]

@mominhaq @rizi_85
after tweaking with shield i got these results from morimoto.check out the color it was 30feet away

I'm expecting nothing less than this

Sent from my iPhone using Tapatalk

[dav111]

Excellent! please also elaborate what type of modification you did.
The results are very good.

i will post pics to make things clear

[dav111]

That looks really cool. At this point I don't want to open my headlamps anymore and I am satisfied with the current output I have.

However if I do another retrofit I'll definitely do the mod.

this mod is worth a try

[dav111]

@highroller
teaser stiil work in progress

[highroller]

@highroller
teaser stiil work in progress

i'm lovin it

[rizi_85]

@highroller
teaser stiil work in progress

WoW! a quad retro ..............

are both (high and low) bi-xenon? Also is it the picture or the high beam projector is pointing a little lower than the low beam one?

But excellent work Bro!

[dav111]

WoW! a quad retro ..............

are both (high and low) bi-xenon? Also is it the picture or the high beam projector is pointing a little lower than the low beam one?

But excellent work Bro!

yup both are bixenon on is fxr and small one is morimoto mini.it low because of inadequate space and its alignmentis according to the cuttoff of fxr

[dav111]

Good job! Looks really good on the car. Like something from Transformers

Sent from my Xperia U using Tapatalk 2

you are right g37r shroud have changed the way it looked earlier

[dav111]

@highroller so here are results i hope you like it and you get them in same condition

[highroller]

101% awesome bro.

Sent from my iPhone using Tapatalk