Brake booster leaked oil into engine through vacuum of engine

[pwuser160873664565]

Hi, I need suggestion in this matter as too much oil has been leaked into engine through brake vacuum boaster as master cylinder leaked oil into servo and from servo to engine, now car release black smoke on driving, and when I start it in the morning it releases white smoke. Now I have changed brake cylinder and servo as well but still oil remains in engine, which makes plugs wet and I am facing same issue, so please suggest what should be done to remove brake oil from engine?
Car is charade g100 with SZFE swap, vitx first gen eng

[capsat]

please visit a workshop which can perform compression test. wet & dry values may please be shared.
start up smoke / smoke at engine throttle is about multiple factors.

Brake oil leaking via booster into intake manifold is bad 'BRAKE LINE VALVE'

check this thread for correct understanding

[Proverbial_Slang]

Have the intake manifold removed and cleaned. Change vacuum lines as they must be soaked. Get plugs cleaned. Hopefully this will resolve the issue.

If it doesn't, then get compression test done.

[pwuser160873664565]

I have consulted the mechanic, after inspection he concluded that you are facing two separate issues one is brake servo and vacuum line and other is black smoke which has more to do with the petrol he said your injectors are faulty and didn't match the number, replacing injectors will solve black smoke and rich consumption of fuel. I hope replacing them wil solve my problem.

[Proverbial_Slang]

If the black smoke wasn't there before, then it is an unlikely culprit.