Can we swap 660cc efi engine into Mehran?

[samboy1231]

I was just curious about my mehran's fuel consumption. It give 10kmpl in Islamabad. So i wondered that may be we can swap 660 cc efi into mehrans hood. Need suggestion on it from experts and kindly also tell pros and cons of it.

[bradpit]

Brother it can be easily done but its waste of money and time fine tuned Mehran goes very economical.

You have to change the whole gearbox and mounts of engine major modification.

[afnan.bashir]

Can be done easily and what i think its good if you want your problemmatic carby engine out. Its engine should cost something in 20-35k with everything wiring and gear box too

[samboy1231]

Can be done easily and what i think its good if you want your problemmatic carby engine out. Its engine should cost something in 20-35k with everything wiring and gear box too

Thanks for your reply and what do you think. Will it make the fuel consumption better?

[afnan.bashir]

If it is proper swap and wiring and all sensors are done correctly. Other than that you need to check what is power to weight ration for 660 cc car. I suppose they are nearly same weight as mehran. Who knows if mehran is lighter

[muhammadayubkhalil]

https://www.pakwheels.com/forums/engine-transmission-powertrain/227187-suzuki-f6a-efi-engine-suzuki-mehran-better-millage-petrol#post4211905

[capsat]

Can be done easily and what i think its good if you want your problemmatic carby engine out. Its engine should cost something in 20-35k with everything wiring and gear box too

Please source & sell it to me at 50,000 for a 660 engine complete with transmission, ecu, wiring & sensors. - I have 1 suzuki fx 1984 model for over 3 years waiting for such bargain deal. - 660 JDM engine with mounts wiring sensor transmission is nowhere under 60,000 either KHI or LHR yards labor charges are extra

[Nabeel009]

Please source & sell it to me at 50,000 for a 660 engine complete with transmission, ecu, wiring & sensors. - I have 1 suzuki fx 1984 model for over 3 years waiting for such bargain deal. - 660 JDM engine with mounts wiring sensor transmission is nowhere under 60,000 either KHI or LHR yards labor charges are extra

nice offer buddy.. bring 50000 i will find a perfect engine for you with each and everything including the labour charges.
is offer pe to mai apkly liye khwari b kat lunga mechanics k sath

[Nabeel009]

donot expect anything above 15 or max 16km/l from it.

[capsat]

am in karachi, do let me know where in Pindi quality JDM alto 660 engine is available with pictures plz

[Nabeel009]

am in karachi, do let me know where in Pindi quality JDM alto 660 engine is available with pictures plz

you can find good 660 engines in saddar rwp (mithu ka hata). prices in sultan ka khu are a bit on the higher side as compared to saddar for this engine dont know about others

[capsat]

Thank you

[afnan.bashir]

@capsat well saw few there. Here you can get D17 in 52 with everything...... i helped a friend to get one. Well i said Should be............... not is. Well on my next visit ill try and find something for you.

[bradpit]

@capsat well saw few there. Here you can get D17 in 52 with everything...... i helped a friend to get one. Well i said Should be............... not is. Well on my next visit ill try and find something for you.

Brother what would be the estimated cost including labour to place D15Z7 (3 stage VTEC) or D17A2 Head on D15Y3 block ?

Apart from Head, gaskit, ECU and dual VTEC solenoid what else would be required ?

All the sensors and wiring, coolant lines etc would work with stock setup ?

Is D17A2 Head more suitable or D15Z7 or any other D series with the stock D15Y3 ?

[afnan.bashir]

@bradpit well i am no expert in that kind of modification. not sure what this mixture would become and which ECU is best. I suppose should keep its default as ECU Chipping is not available here so you would not be able to get compensation for extra liters you add from D15 to D17 pistons

[godzilla-ak47]

can somebody tell me where can i find the khokas( chassis ) of fx or mehran i need that thing
and 660cc enignes with gud economy

[pwuser157923796269]

Nabeel sir, please give your contact number i want to change