Car Care and Detailing Dreams (Part 2)

[ahmad_yar]

City ka dedar?

wrong number

[margallar]

Jazak'ALLAH for asking

Ok I am mentioning the steps/items considering you are hitting Sala.... machine less
& I am also considering you know to define/play the abrasive products & have understanding of:

How abrasive the product is
Pressure applied on pad
How moist the pad is
Using water spray bottle to moist the working area
How the normal abrasive product can become brutal when used wrongly

Always remember with abrasive products " Dont worry to finish unfinished rather than eating clear coat "

As we need to convince Sala Sab that detailing can do wonders so our target product is M105 Micro Glaze ultra cut compound by Meguiars but we will follow the procedure

1-- Wash

2-- Clay her, mothers or meguiars , what ever is available , do follow instructions, you know it.

3-wash again

4-- Our main product in this detailing is M105 , its a great product for red/dark colours , do wonders with machine but you can get results by hand also as you can brake down abrasive particles by hand
Pad should be properly covered with product , do a test panel with medium pressure & dont let the product dry( spray water ) as I mentioned above & check the result , deep scratches wont go so dont over do but for swirls & holograms it will work insh'ALLAH & Glow 'n' shine will restore & your Bin-law will like it
wipe the ride with detailer spray & inspect

5-- Now give her a run of Meguiars Ultimate Polish , follow procedure & panel by panel , it will enhanced the shine

6-- Meguiars NXT 2 coats apart 12 hours

Above procedure is elbow greasing & time time taking but hopefully you will enjoy , do take rest & dont forget to wipe off next working panel with damp MF to make it dirt less

Good luck hope it works & He will take care of Her... afterwords

Amir bhai the procedure you mentioned is good but wouldn't m105 be somewhat an overkill, it is very highly abrasive, its used to remove sanding marks. i think you wanted to recommend m205 which is a much more milder abrasive.

[Marwanpasha]

Damn it!.. Hit a pot hole this morning.

-------------------------------------
https://www.pakwheels.com/forums/members-member-rides/215631-pakwheelers-map-place-marker-get-connected
-------------------------------------

Chh.. chh.. chh...

Tyre also punctured..?

What are the repairing methods..?

Sent from my iPhone using PW Forums mobile app
Yahoo i got the app at last...!

[fazalwahab11375]

tire not punctured. its a low profile. Its in full required air pressure.. though tire rubber little cut.
rim can be refinished but I don't want to do it. :-!

Chh.. chh.. chh...

Tyre also punctured..?

What are the repairing methods..?

Sent from my iPhone using PW Forums mobile app
Yahoo i got the app at last...!

[dynamicallyStatic]

That was something new for me :).
But instead of 18$/L product. I can easily get 3$ car service :).
Anyways thanks for the info. That was really something new for me. Thanks

Sent using setalite phone

Also join
www.facebook.com/bodybuildingtipsntricks

That 18 bucks product is supposed to give you 32 washes 30ml per 4 ltrs of water.
For service, be sure you provide your car shampoo and microfiber towels to them. Using their surf or a sachet of head n shoulder would dry your car skin and also remove the wax you have applied.

--
Sent from a hand held device

[dynamicallyStatic]

Damn it!.. Hit a pot hole this morning.

-------------------------------------

Itnay low profile...
Fazal bhai, tyre lagwanay ka takalluf kiyun Kiya... Rehne dena thaa

--
Sent from a hand held device

[fazalwahab11375]

Sir main nay nahi lagaey. The car came with same from factory as original. Stock rims and stock tires

Itnay low profile...
Fazal bhai, tyre lagwanay ka takalluf kiyun Kiya... Rehne dena thaa

--
Sent from a hand held device

---

https://www.pakwheels.com/forums/members-member-rides/215631-pakwheelers-map-place-marker-get-connected

---

[accord7362]

Amir bhai the procedure you mentioned is good but wouldn't m105 be somewhat an overkill, it is very highly abrasive, its used to remove sanding marks. i think you wanted to recommend m205 which is a much more milder abrasive.

Car 2010 say detail nahee hoiee

M105 Super Micro Abrasive Technology = SMAT by hand kuch bhee nahee hota if, keep the working area moist , I hope he will handle :), the target is , slight cut & remove swirls with restored surface

Ya I know M205 is micro glaze polish

[vague_one]

Damn it!.. Hit a pot hole this morning.

-------------------------------------
https://www.pakwheels.com/forums/members-member-rides/215631-pakwheelers-map-place-marker-get-connected
-------------------------------------

aaaaaawwwwaaaaaaaaaaaaain loki kenday nay sadiyan sarkan kharab nay......

[AusI]

Jazak'ALLAH for asking

Ok I am mentioning the steps/items considering you are hitting Sala.... machine less
& I am also considering you know to define/play the abrasive products & have understanding of:

How abrasive the product is
Pressure applied on pad
How moist the pad is
Using water spray bottle to moist the working area
How the normal abrasive product can become brutal when used wrongly

Always remember with abrasive products " Dont worry to finish unfinished rather than eating clear coat "

As we need to convince Sala Sab that detailing can do wonders so our target product is M105 Micro Glaze ultra cut compound by Meguiars but we will follow the procedure

1-- Wash

2-- Clay her, mothers or meguiars , what ever is available , do follow instructions, you know it.

3-wash again

4-- Our main product in this detailing is M105 , its a great product for red/dark colours , do wonders with machine but you can get results by hand also as you can brake down abrasive particles by hand
Pad should be properly covered with product , do a test panel with medium pressure & dont let the product dry( spray water ) as I mentioned above & check the result , deep scratches wont go so dont over do but for swirls & holograms it will work insh'ALLAH & Glow 'n' shine will restore & your Bin-law will like it
wipe the ride with detailer spray & inspect

5-- Now give her a run of Meguiars Ultimate Polish , follow procedure & panel by panel , it will enhanced the shine

6-- Meguiars NXT 2 coats apart 12 hours

Above procedure is elbow greasing & time time taking but hopefully you will enjoy , do take rest & dont forget to wipe off next working panel with damp MF to make it dirt less

Good luck hope it works & He will take care of Her... afterwords

Really m105 by hand can remove holograms ?? 0_0

[DUDE007]

Damn it!.. Hit a pot hole this morning.

-------------------------------------
https://www.pakwheels.com/forums/members-member-rides/215631-pakwheelers-map-place-marker-get-connected
-------------------------------------

Sorry to see what the pothole did.....must be an eye sore. Have you thought about getting the rims wrapped?

[accord7362]

Really m105 by hand can remove holograms ?? 0_0

To some extend & why not to give a try

[accord7362]

I have another Question for Amir Bhai and Ahmad Bhai and anyone else who goes though my post...
My B-in-Law has city in same Habanero Red and its 2010.
Now its never been detailed yet so it definitely has swirls and minor scratches etc. It has dirt settled in the base and colour is little faded too. So I want to know what all processes should I do with it and with which all products? Once the paint is revived, then I will start using the same polishes which I am going to buy for my own Queen.

Really m105 by hand can remove holograms ?? 0_0

To some extend & why not to give a try

And as ride is never detailed with power tools , I don't mean holograms by buffer or Pad trails , just encouraging the poster to swirl free finish

Indeed for holograms caused by wrong used to power tool , approach would be different
.
.
.
Thanks for pointing out , bolding & mentioning

[asim510]

That 18 bucks product is supposed to give you 32 washes 30ml per 4 ltrs of water.
For service, be sure you provide your car shampoo and microfiber towels to them. Using their surf or a sachet of head n shoulder would dry your car skin and also remove the wax you have applied.

--
Sent from a hand held device

Yes. Ur right. I always gave them my own stuff. Just use their services and water.

Sent using setalite phone

Also join
www.facebook.com/bodybuildingtipsntricks

[tashkeel]

Jazak'ALLAH for asking

Ok I am mentioning the steps/items considering you are hitting Sala.... machine less
& I am also considering you know to define/play the abrasive products & have understanding of:

How abrasive the product is
Pressure applied on pad
How moist the pad is
Using water spray bottle to moist the working area
How the normal abrasive product can become brutal when used wrongly

Always remember with abrasive products " Dont worry to finish unfinished rather than eating clear coat "

As we need to convince Sala Sab that detailing can do wonders so our target product is M105 Micro Glaze ultra cut compound by Meguiars but we will follow the procedure

1-- Wash

2-- Clay her, mothers or meguiars , what ever is available , do follow instructions, you know it.

3-wash again

4-- Our main product in this detailing is M105 , its a great product for red/dark colours , do wonders with machine but you can get results by hand also as you can brake down abrasive particles by hand
Pad should be properly covered with product , do a test panel with medium pressure & dont let the product dry( spray water ) as I mentioned above & check the result , deep scratches wont go so dont over do but for swirls & holograms it will work insh'ALLAH & Glow 'n' shine will restore & your Bin-law will like it
wipe the ride with detailer spray & inspect

5-- Now give her a run of Meguiars Ultimate Polish , follow procedure & panel by panel , it will enhanced the shine

6-- Meguiars NXT 2 coats apart 12 hours

Above procedure is elbow greasing & time time taking but hopefully you will enjoy , do take rest & dont forget to wipe off next working panel with damp MF to make it dirt less

Good luck hope it works & He will take care of Her... afterwords

Bhai, i will definitely try and use the procedure you have mentioned.
You have really explained in detail which will ultimately prove to be very helpful.

[AusI]

To some extend & why not to give a try

And as ride is never detailed with power tools , I don't mean holograms by buffer or Pad trails , just encouraging the poster to swirl free finish

Indeed for holograms caused by wrong used to power tool , approach would be different
.
.
.
Thanks for pointing out , bolding & mentioning

I was just caught off guard when I saw the comment coming from you since you are a much more experienced detailer than I am. My intention was not challenging if it came across that way and neither did it mean any disrespect (the bolding and mentioning). Was just trying to clear it out in my head and on the thread obviously.

As far as your advise goes, I think it was spot on, with hand the m105 isnt very abrasive so he can def try, though I usually opt for a test panel make a 3 x 3 segment and check with a milder agent. Start off with m205 and some good elbow grease. Might just work out. If that doesnt work m105 is a good option as well.

Has anyone tried meguiars d151? Havent tried it yet..

[racerali]

need suggestions for bike paint which has too much oxidation can any one tell me how to remove it

[accord7362]

I was just caught off guard when I saw the comment coming from you since you are a much more experienced detailer than I am. My intention was not challenging if it came across that way and neither did it mean any disrespect (the bolding and mentioning). Was just trying to clear it out in my head and on the thread obviously.

As far as your advise goes, I think it was spot on, with hand the m105 isnt very abrasive so he can def try, though I usually opt for a test panel make a 3 x 3 segment and check with a milder agent. Start off with m205 and some good elbow grease. Might just work out. If that doesnt work m105 is a good option as well.

Has anyone tried meguiars d151? Havent tried it yet..

Love you as always

Indeed testing first as I mention in fist post and also wrote some safety point regarding abrasive product

[highroller]

need suggestions for bike paint which has too much oxidation can any one tell me how to remove it

Ali although it is a car detailing thread but since I've done some correction on a bike which mostly come with single stage paint I'm goin to share some for u.

Before

After

You may not find it 100% correction but I wanted to have a taste of single stage paint so found this bike to work with.

Clayed, UC on 3M green cutting pad attached to DA pcxp with dial @ 5. Followed by UP by hand applicator.

Sent from my iPhone using Tapatalk

[dynamicallyStatic]

A few car parked shots, road side and in the market from ramzan. All of the clicks below are after some on-the-road travel of the car so it has light dust on it.
No new sealant/wax has been applied, just wash with Turtle ice shampoo and detailer wipe down with Optimum Detailer. For new readers, the car was clayed and sealed with acrylic sealant (werkstat) about 2.5-3 months ago (3x layers the first time and another 2x layers about 5 weeks ago):

Always a challenge to take pictures in the market, with people and cars coming in your way and then so may eye balls looking at you "is he a spy? black water ? cia ? "

Too much sun on one of the sides but still the other half of the car was well worth a shot