Aaslamalaikum everyone.
I have been waning to do a complete extensive interior detail of my car for a long time but couldnt get the time and hen the products got delayed bu finally all the necessary products were in my hand this weekend so couldn resist to star.
The process took 2 days.
Here i goes.
1st day:
Started at about 3:30pm and ended at about 8pm
-Started with cleaning the tyres with shampoo + APC solution using a cheap microfiber and a brush
-Cleaned the car with DODO juice BOB shampoo using double bucket method.
-Clayed the car with Meg Smooth Clay kit.
-Cleaned with DODO juice shampoo using double bucket method.
-Used UC & UP on some portions of the car and then protected with some carnauba(mothers step 3).
2nd day:
Started at about 12:30 and finished at about 4pm
-Gave a detailer wipe to remove settled dust.
-Completed the car with the treatment by UC and UP and protected the finish with carnauba wax.
-Treated all tyres + wheel arch's plastic + exterior plastic trim with a trim protector.
-Gave another detailer wipe on the car to remove any fine dust particles.
-Gave the whole car a coat of NXT 2.0 Tech wax.
About 70-80% of the swirls go removed from the car with UC applied by hand which was great. Though couldnt clearly capture the paint correction because didnt have proper camera. For now you will have to suffice with my blackberry's 5mp camera:P









