Car Care and Detailing Dreams

[Bad_Cheetah]

Will be waiting for your review of Mother's Sealer and glaze. Try to take some before and after pictures also.

and off topic query which wiring kit you got. Also do post some before and after pictures while using the pre soak. also mention the price of Mother's Sealer and Glaze (if not here then you can PM me :)).

I hope it doesnt pour over the weekend, because of the recent monsoons i havent been able to detail my car.

Rizi bhai ive mentioned the price above, it is for 950 rupees, Pure Carnauba is 1800 and Synwax for 1300.

Got Streetwires ZNX21K kit, Zero Noise;)

[tayyabchaudhary]

This is the Meguiar's SoftBuff 6.5 inches Polishing Pad.

[Bad_Cheetah]

Tayyab, i saw the orbital buffer, and looked at how it works, but im kind of reluctant to use it on my car, tell me it wont harm the clear coat lol.

[tayyabchaudhary]

Tayyab, i saw the orbital buffer, and looked at how it works, but im kind of reluctant to use it on my car, tell me it wont harm the clear coat lol.

No, it will not harm the clear coat in any way.It is just used for waxing and I have read alot of reviews that an Orbital Buffer,cannot,in any way, be used for correcting the paint which means it doesn't have the ability to abrade the clear coat.Just be sure not to apply pressure(Although,these Chinese Buffers stop when you apply pressure:P) and apply as thin layer as you can because the excess has to be come off as a residue and Buffers tend to leave a powdery haze if you apply too much wax.Its movement is orbital and constant 3000RPM along with a lot of vibration, so it is completely safe for clear coat.Just be sure not to buff any of the area for too long because the paint get heats up due to the motion of Buffer and it may burn your paint.These are some really simple precautions you need to adopt and you will get use to with time.After that,you can buy the Rotary Buffer for your professional use like polishing etc.

[vague_one]

Usman Bhai how was the trip ? what did you buy? and how was the meet with the honda boys.??
Yaar i personally liked the shopkeeper alot and he is a really really honest person.Plus the margin he is keeping in the Meguiars products is very low.The pads are available at 14$ on meguiars site.And he is giving it for 1300 which is very very reasonable. plus the nxt wax in karachi is for 2500 or 3000 and he is giving for 2100 only,
Last but not the least, shashkay to bht hen yaar apke dukan me.Abi enter nahi hue ap ke saray kharay hogye "wo daikho sahab ae hen " :D:D

And Usman Bhai thanks alot for tracking those pads for me.I was really worried about those.Thank you really very much Usman bhai

Yes Usman Bhai that fitted very nicely with my Rotary Backing Plate.
I will use it next week as my car was waxed yesterday and will tell you the result.

I was like "Koi aur na lele" That's why did all the things pretty fast

Once again thanks yara

JazakAllah bro. Glad to help out where I can.

[vague_one]

I just got back home, as mentioned above, we met Usman bhai(vague one), we had a pre-planned visit.
It was the first time ive met Usman bhai, and he is such a lovely person to talk to, an awesome person indeed. Would give you the bestest of solutions, and awesome company.
Because of him i got a free sample of the Pre-Soak solution, which i would use over the weekend and post results.
Other than that i also bought my first Mother's product, Mother's Sealer and glaze, Step 2, excellent to mask swirl marks and minor scratches, though it is clearcoat safe, and could be used frequently.
The red emblem, originals were pretty expensive, thus dropped the idea until i get some sastay walay lol.
In the end today was MashAllah a great day, met Usman bhai, got Step 2, got my wiring kit for my SQ system, and also converted one person to SQ, Usman bhai :D.
Looking forward for your review about the ice wax Usman bhai. Was lovely meeting you, was also looking forward to meet you Tayyab, but Usman bhai told us that you left early, chalo next time inshAllah!

Bas kar do yar, itni izzat ki aadat nai hai, ajeeb sa mehsoos ho raha hai ! JazakAllah bro, it was very nice meeting you too.....the wax is awesomeeee, got home, didnt even change to casual clothes an started washing an waxing.....results will be given in a bit.

[devilz_apprentice]

I just got back home, as mentioned above, we met Usman bhai(vague one), we had a pre-planned visit.
It was the first time ive met Usman bhai, and he is such a lovely person to talk to, an awesome person indeed. Would give you the bestest of solutions, and awesome company.
Because of him i got a free sample of the Pre-Soak solution, which i would use over the weekend and post results.
Other than that i also bought my first Mother's product, Mother's Sealer and glaze, Step 2, excellent to mask swirl marks and minor scratches, though it is clearcoat safe, and could be used frequently.
The red emblem, originals were pretty expensive, thus dropped the idea until i get some sastay walay lol.
In the end today was MashAllah a great day, met Usman bhai, got Step 2, got my wiring kit for my SQ system, and also converted one person to SQ, Usman bhai :D.
Looking forward for your review about the ice wax Usman bhai. Was lovely meeting you, was also looking forward to meet you Tayyab, but Usman bhai told us that you left early, chalo next time inshAllah!

Indeed he is a very nice fellow! MashAllah! A very nice guy to talk to! He gave some pretty good advices on detailing n some things about taxation which has actually helped me yesterday. Thank u Usman Bhai! On his recommendation, i went to get that Pre-Soak from Saca Autos yesterday, but sadly it was closed.
From where did u get that Step 2? I m eager to get my hands on one as my previous bottle finished up long time back.

[vague_one]

Product : Turtle Wax ICE Synthetic Paste Polish

Price : Rs.1,300

Bought From : This question is silly now for me...I think everybody must know this answer by now, Saca Plus on Montgomery Road,Lahore.I dont trust any other supplier with Turtle Wax products.....Ive got 3 of the same polishes from different places, an all three have different results, the one I bought from Saca was firstly sealed an on top of it, had the best result....I m past the point where I have time to experiment with different dealers....pricing is perfect, I can understand a little profit, but I want the real deal.

Rating : 9\10

Good : One HUGE advantage... Turtle Wax actually encourages you to cover all surfaces of the vehicle, including rubber mouldings and all plastics. That's right, no more white marks on the plastic cladding!
Another nice benefit here is the fact that the paste can be applied in direct sunlight.
Time saving as well, I did the whole car in a quarter of the time I usually do my car...................biggest adv for me. Free micro fibre towel as well....kaammaal hi nai ho gae;)

Bad : Price is a bit on the steep side.

Experience: Worth every bit of polish inside it, real rich layer on top, real rich! Enjoyed using it to the max.......cleaned the headlight lens, the bumper trim...........quite frankly with a hand polish I havent seen this much of a result....till yet.....an I have used tons n tons n tons of products.......much to my liking, this ICE range from Turtle Wax is turning out to be a very very nice range of products.....Lekin yar please I really request everybody when ever you use products read the instructions very carefully.....this polish uses a moist applicator, then when the haze is wiped off you have to buff with a clean side of the micro fibre provided.....only when you apply as instructed you get the best results otherwise youll just end up with galyian for the product....verdict : Alam pana khush huay!

[devilz_apprentice]

@Usman Bhai, is Waseem sb. also dealing in Meguiar's now?

[vague_one]

@Usman Bhai, is Waseem sb. also dealing in Meguiar's now?

He had a couple of things imported, I will come confirm tomorrow if he is offically dealing in it or not. Yea yesterday some trader of the plaza passed away.........theyre open now!

[devilz_apprentice]

500 replies to the thread! Congrats boises!!

[vague_one]

Indeed he is a very nice fellow! MashAllah! A very nice guy to talk to! He gave some pretty good advices on detailing n some things about taxation which has actually helped me yesterday. Thank u Usman Bhai! On his recommendation, i went to get that Pre-Soak from Saca Autos yesterday, but sadly it was closed.
From where did u get that Step 2? I m eager to get my hands on one as my previous bottle finished up long time back.

JazakAllah bro, glad to know your gettin better at taxation

[vague_one]

500 replies to the thread! Congrats boises!!

MashAllah..........the thread has really reallllllllllly gained momentum in the last few days........couple of people havent spoken in ages, stingray,spiderman,yasira where are you guys (H) nazar nai aa rahay, speak up people!

[Bad_Cheetah]

Good to hear the result of ICE usman bhai, i would also give it a try, infact we should have a complete detailing session of our cars mutually and then post pictures and talk about the result over a glass of coke ( i dont drink tea )

[khurum]

@ tayyab for how much u bought the pad

[vague_one]

Good to hear the result of ICE usman bhai, i would also give it a try, infact we should have a complete detailing session of our cars mutually and then post pictures and talk about the result over a glass of coke ( i dont drink tea )

I offered you coke mate, tum hi dulhay mian banay huay thay susral mai! Sure thing boss...anytime.....I predict a good session coming up! Also want to hear yer sq.....suna hai bara kharchay ho rahay hain aaj kal band bajay par.

[Bad_Cheetah]

I offered you coke mate, tum hi dulhay mian banay huay thay susral mai! Sure thing boss...anytime.....I predict a good session coming up! Also want to hear yer sq.....suna hai bara kharchay ho rahay hain aaj kal band bajay par.

ahahahahahaha Sir coke next time pe layain ***, abhi tou dosti huwe hei, acha nahin lagta pehli hi meet pey coke pe layain lol.
SQ is a must, once you hear it, you'd fall in love with it, DEFINITELY!
bus usman bhai hei aik chota mota sa band baja hamara bhe, not extra-ordinary though:$

[vague_one]

@ tayyab for how much u bought the pad

Heres the answer

Usman Bhai how was the trip ? what did you buy? and how was the meet with the honda boys.??
Yaar i personally liked the shopkeeper alot and he is a really really honest person.Plus the margin he is keeping in the Meguiars products is very low.The pads are available at 14$ on meguiars site.And he is giving it for 1300 which is very very reasonable. plus the nxt wax in karachi is for 2500 or 3000 and he is giving for 2100 only,
Last but not the least, shashkay to bht hen yaar apke dukan me.Abi enter nahi hue ap ke saray kharay hogye "wo daikho sahab ae hen " :D:D

And Usman Bhai thanks alot for tracking those pads for me.I was really worried about those.Thank you really very much Usman bhai

[khurum]

@ vague or tayab bro can any 1 of you do me a favour in buying that for me n sending it to me to khi i want cutting pad

If yes then plz leme knw coz only optimum got those n asking 5000 for 3 pads

[vague_one]

@ vague or tayab bro can any 1 of you do me a favour in buying that for me n sending it to me to khi i want cutting pad

If yes then plz leme knw coz only optimum got those n asking 5000 for 3 pads

Lemme confirm an then I`ll get back to you if its still there..Do I have the proper understanding that you only want one,more precisely the cutting foam only?