Car Care and Detailing Dreams

[vague_one]

@vague_one Sarkar no results It didnt peel off. I think tezaab he dalna parega

No probs if it didnt work with one way........there are others, you see the two most common ways of smoking lights here are either you put tint paper on them or you spray paint them, assuming the first method of heat didn`t work , then go to a more sureshot but experience requiring method..... wetsand your lights with 1500 or 2000 grit sandpaper then hit it with some megs plastic x and buff em back to shine with a rotary......cant go wrong with this.....awaiting result of this method........

[versatilegenious]

No probs if it didnt work with one way........there are others, you see the two most common ways of smoking lights here are either you put tint paper on them or you spray paint them, assuming the first method of heat didn`t work , then go to a more sureshot but experience requiring method..... wetsand your lights with 1500 or 2000 grit sandpaper then hit it with some megs plastic x and buff em back to shine with a rotary......cant go wrong with this.....awaiting result of this method........

I went to the painter and decoration shop. They said that it cant be peeled off. Its so hard. So i am thinking of keeping the tint.

[vague_one]

I went to the painter and decoration shop. They said that it cant be peeled off. Its so hard. So i am thinking of keeping the tint.

Post some pics here if you can............an Im the wrong sort of person to be tellin it cant be done..............where theres a will, theres a way......post pics or keep the tint till I come to Islamabad next month....Ill do it for you then......but this will work....sure shot!

[versatilegenious]

Thats so nice of you.will post pics in the morning as i have many photos to upload already @VCCCP Isl ch thread

[vague_one]

Thats so nice of you.will post pics in the morning as i have many photos to upload already @VCCCP Isl ch thread

Will be waiting for them.......

[vague_one]

Did some carbon fibre sheet on Junaids car......T.A.K. speed had the sheet sent in, Thanks to Khurum Bhai, an we had a local tint guy put it on......junaids account aint working to here`s the teaser for it.....

[shazo]

hmmm trunk z looking good...

[shozi123]

Just to put you in check, the basic turtle formula is nowhere near the coolness of the ICE..........but for starters......notin more like it to learn the basics.......Nice collection to start with.....do come back with the results...... an do read the instructions carefully on how to apply the stuff......

Where are the instructions link please :S

[rockk]

Enjoying Anti-Detailing weekend:)

[vague_one]

Where are the instructions link please :S

Supposed to be on the back of the pack.......otherwise, wash an dry the ride, using an application pad, blot a coin sized amount onto the foam an using circular motion apply it to the surface....let it haze an wipe off with a mf.....

[F1]

carbon sheet luks good.. i also wana have one ..can u help me in that ? and what will be its cost in total ?

[vague_one]

carbon sheet luks good.. i also wana have one ..can u help me in that ? and what will be its cost in total ?

Looks daaaaaaam good in real life......an we`re here to help you......what do you want done on yer ride??

[F1]

Thanx bro ..i hv 05 civic and i really impressed by your work i have been a silent observer of your detailing thread..i want to get it polished to remove minor scrathes and give it a good shine ...secondly do u have any solution of elfy marks ?my driver spilled few drops m realy worried for it ..and thirdly what wil be the total cost of carbon sheet if i get it done from you ?

[rizi_85]

Junaid's car is looking good! waiting for more pics!

@vague_one bro aik msg kia hai aap ko .......

[Bad_Cheetah]

Alllaaaa, Hala Lala for junaid, bus abb safdar ki margala reh gayi hei

[margallar]

Alllaaaa, Hala Lala for junaid, bus abb safdar ki margala reh gayi hei

safdar ki margalla ko sab kuch ek sath mile ga, respray aur naswar ek sath, hala lala. bohat ziada nawar ka ab bandobast krna parey ga:D

[vague_one]

Thanx bro ..i hv 05 civic and i really impressed by your work i have been a silent observer of your detailing thread..i want to get it polished to remove minor scrathes and give it a good shine ...secondly do u have any solution of elfy marks ?my driver spilled few drops m realy worried for it ..and thirdly what wil be the total cost of carbon sheet if i get it done from you ?

JazakAllah bro for liking the work........elfy marks.....hmmmmmmmm......I took the ones I had on my ride off with a blade and some soapy solution for lube.......get a hold of an expert tint person an have him remove them.......as for your other concern, let me guide you a bit, polishing will remove minor swirls only, not scratches but yes you will get the good shine ........you can contact Khurum Bhai for the costin on the cf sheet......keep on shinning!

[jaggi]

https://www.pakwheels.com/forums/members-member-rides/180749-jaggis-new-ride-toyota-corolla-6#post3119253

[jaggi]

https://www.pakwheels.com/forums/members-member-rides/180749-jaggis-new-ride-toyota-corolla-6#post3119253

[vague_one]

https://www.pakwheels.com/forums/members-member-rides/180749-jaggis-new-ride-toyota-corolla-6#post3119253

Usman bhai, I see the work has been paying off! Thanking your lucky stars for the lil demo ? Man I hate to think how much youd have wasted if you had your way........MashaAllah looks very very nice! Reflections galore......Colour has attained a loooot of depth!!!Hope you are happy with the black box!!!