Fywdyl contacted through the group buy for some help with his speed 3. He purchased my decontamination package.
Here are some pictures I snapped up during the process, I didn’t have a second set of hands today so you’ll see what I see through my eyes.
This is how it was before I started
As always I start with the wheels, as their usually the dirtiest.
Old wheel weight residue,
Working it
Removed, those white lines are actually the metal underneath the finish scratched off by the person who was doing the alignment.
Dirty exhaust
Half done exhaust
Finished exhaust
Time for decontamination,
I started with removing all the tar from the vehicles, here is some pictures of tar spots bleeding
Then I went to the iron remover
Then I proceeded to clay bar the vehicle
Then I taped up the PPF around the front of the car because I was about to begin AIO polishing.
Here you see the slight difference between polished area and the part the tape was protecting
Here is the finished product
