Charade 84 wiper motor needed

[qamer.malim]

Asalaamou Alikum wr wb How is everyone doing? Brothers I need to replace my Charade Wiper Motor, can someone guide me about it? I have no idea from where I can get it in Karachi, Or anyone knows who can repair it.
Regards

[omersiddiqui5482]

Check Shafiq Mor Scrap Market with your old viper motor. you will find it there!

[qamer.malim]

Jazak Allah Khaira'n, I will check tomorrow

[brownrose78]

Dear i think, yes Shafiq Mor scrap market has variety of old motors, check your speed as well as weight of your wiper accordingly.
If it is new silicone type, then weight is light but if you have installed 4 blade or Long width or original metal wipers then it is heavy & you will have to install some jdm motor.

There are some motors like Suzuki mehran & Alto which usually fits in alll car...Even some of the popcorn sellers also uses those wiper motors for popcorn machine

[qamer.malim]

Jazak Allah Khaira'n, Yes I will visit n check at Shafiq Mor In'Shah'Allah, I think will try to find JDM motor as am using old metal stuff.

[Xulfiqar]

its a very common 2 speed denso motor, even the old corolla used it, the usual culprit is rust and corrosion in the motor case which causes the armature to bind, further done by drowning the damn thing in "diesel service" of engine - the diesel fuel destroys the rubber gasket of the motor, gets inside itself and starts dissolving the carbon brush pack - the rest of the death happens from moisture getting inside.

btw - what are 4 blade wipers?

[Xulfiqar]

This is a viper motor

[qamer.malim]

Asalaamou Alikum wr wb
Hope you are doing well Xulfiqar sb, Yes you are 100% correct n also lack of use we hardly use it in normal days, Alhamdoulillah today my mechanic ustad mehfoz near Matric Board office fixed my old motor by himself n now it's working fine Alhamdoulillah, I also changed damage wind shower bottle motor too so I can regularly clean my wind screen through wiper to keep it in use. But it's spray nozzel which I can't get it from anywhere every one is giving me VSR nozzle which is too small, if you know from where I can get It please do let me know.

[omersiddiqui5482]

i would not suggest you searching for a part during these pandemic days better wait till it starts coming down! it is available at plaza.