Civic 95 engine swap

[N2O]

35% duty on the invoice+shipping amount

[Maverickiz3d]

35% duty on the invoice+shipping amount

yen 2,000

[N2O]

how much was shipping?

[Maverickiz3d]

how much was shipping?

Not sure, but it should not be more than Yen 3,000.

https://www.post.japanpost.jp/int/charge/list/ems_all_en.html

[Maverickiz3d]

So I finally visited Vicky today for the checkup. Sensors seem to be working; he checked some voltages, but after finding out there is no DCL port, he would work any further on the car

How can i install DCL port in the wiring? Is it easily available? and from where? What would be the cost?

Further, I have EG6 cluster now which has CEL option. How to get that light working; I mean which wires need to be present and from where on ECU it will come to the cluster?

Would I need to change any wiring harness inside the car?

[hornblower]

So I finally visited Vicky today for the checkup. Sensors seem to be working; he checked some voltages, but after finding out there is no DCL port, he would work any further on the car

How can i install DCL port in the wiring? Is it easily available? and from where? What would be the cost?

Further, I have EG6 cluster now which has CEL option. How to get that light working; I mean which wires need to be present and from where on ECU it will come to the cluster?

Would I need to change any wiring harness inside the car?

Its dlc bro .... U have to change the wiring for that , my advice if u r going for that change, go for a 16 pin obd2 wiring , dlc is obselete now

[Maverickiz3d]

Its dlc bro .... U have to change the wiring for that , my advice if u r going for that change, go for a 16 pin obd2 wiring , dlc is obselete now

oh yea DLC!

By wiring change, you mean complete engine harness? Isnt that you going to cost a fortune?

All i need is a port to give out codes. and in the cheapest possible way.

What about the CEL light? How can i have that installed? is it a single wire coming out from the ECU to the cluster?

[galant1]

@maverickiz3d

Post the pics of EG6 cluster that you got.

[Maverickiz3d]

@Maverickiz3d

Post the pics of EG6 cluster that you got.

[IHateRollas]

yen 2,000

Check the invoice, someone tried to malign it. 12000 x 35% = 4200
So someone put a '1' before 2 to make it 12000

[Maverickiz3d]

Check the invoice, someone tried to malign it. 12000 x 35% = 4200
So someone put a '1' before 2 to make it 12000

This receipt was emailed to me from Japan. That "1" is actually Yen symbol, obviously not in the best handwriting.

Its possible the customs here considered that as 12000

Well i guess its too late to do anything about it. I already forgot about it. Thanks for bringing it up and remind me of the loss

[saboor73]

This receipt was emailed to me from Japan. That "1" is actually Yen symbol, obviously not in the best handwriting.

Its possible the customs here considered that as 12000

Well i guess its too late to do anything about it. I already forgot about it. Thanks for bringing it up and remind me of the loss

What :o tell them that its clearly mention on receipt that total value is 2000 yen who apointed such jerks anyway :S

[Maverickiz3d]

What :o tell them that its clearly mention on receipt that total value is 2000 yen who apointed such anyway :S

That was back in May

I tried asking about the duty from the guy who delivered. He said i need to pay duty or he will take it back...which of course I didnt want!

[ranker84]

That was back in May

I tried asking about the duty from the guy who delivered. He said i need to pay duty or he will take it back...which of course I didnt want!

Any update regarding your Swap?? your Vtec are engaging now ?? and what is total cost for this swap.

[Maverickiz3d]

Any update regarding your Swap?? your Vtec are engaging now ?? and what is total cost for this swap.

Yes vtecs are engaging after i had the speed sensor changed (no speedo = no vtec)

Car is running alright. Acceleration is good too but only above 2k and above rpm. Having slow acceleration under 2k rpm especially with ac. Might be timing issue but i haven't had time to get it checked. Last time i went to the mechanic and asked him to check the timing, and he checked that car was idling fine so he said timing is okay. So i need to go to a different mechanic who would check everything and then confirm.

Total cost depends on what other parts you want to change while swap is in progress, but it will cost you around 100k.

[ranker84]

Soon i will also swap to this setup in my 95... Also please tell us about fuel consumption and cng... Local highway with and without ac.

[Maverickiz3d]

Soon i will also swap to this setup in my 95... Also please tell us about fuel consumption and cng... Local highway with and without ac.

No cng.
Mileage on petrol on light foot is approx 10km/ltr with 70% ac usage. I feel this can improve. No tuning done on car yet.

[ranker84]

Is there any trouble after swap like jerking etc etc and how can i get speedo for this engine ?? Does this swap worth ... My current engine is 75% previous owner swaped it back in 2011 and its original carby engine... But recently my pully bolt broked inside crank and they repaired it... Mechanic told me this will work fine for small route but if u want to take the car for long routes so have to install new crank cost is between 15-17k and he told me if we open the chamber then have to replace other parts too so it wil be arround 35-45k total overhaul if engine is good from inside... He also suggest me to swap same engine but i want to run on petrol and 3 stage is alot ecnomical... So i will do it with in 2-3 month.

[Maverickiz3d]

Is there any trouble after swap like jerking etc etc and how can i get speedo for this engine ?? Does this swap worth ... My current engine is 75% previous owner swaped it back in 2011 and its original carby engine... But recently my pully bolt broked inside crank and they repaired it... Mechanic told me this will work fine for small route but if u want to take the car for long routes so have to install new crank cost is between 15-17k and he told me if we open the chamber then have to replace other parts too so it wil be arround 35-45k total overhaul if engine is good from inside... He also suggest me to swap same engine but i want to run on petrol and 3 stage is alot ecnomical... So i will do it with in 2-3 month.

No jerking. Make sure you get the wiring done from proper wiring guy, even if you have to tow the car far away to get it done. Or better get the swap done from a place where both swap and wiring is done.

You can get overhauled it will cost you total around 40k at most. If you plan to keep the car for long and have "shauq" of the 3 stage, only then go for swap. Otherwise its just too much expense for just fixing the car.

[ranker84]

Well i will keep car for atleast 3-4 years as i dnt have any plans to change the car... It it dont make trouble and it will last long for atleast 3-4 years then im ready.