Civic 95 engine swap

[mir.azam]

The same pipe is left open in my city 01, a result of ustaadi

[mir.azam]

@xulfiqar bhai please can you tell us what are these for ?

[Glioblastoma]

Anyone guys?

Don't know much about it. But Fahad ayub gave me this persons number, I am really impressed by their work give him a try Vicky 03002761044. My 2e corolla vacuum piping was messed up by so called ustaad's, vicky bhai tried to bring it to original settings but still some ports were blocked deep. Still car is way better then previous.

[Maverickiz3d]

Don't know much about it. But Fahad ayub gave me this persons number, I am really impressed by their work give him a try Vicky 03002761044. My 2e corolla vacuum piping was messed up by so called ustaad's, vicky bhai tried to bring it to original settings but still some ports were blocked deep. Still car is way better then previous.

So i visited Vicky. He explained a lot of things, and plans to inspect my car starting from ecu scanning to complete wiring (or rewiring).

That would set me back at least 12k + any expense on any hardware. Is it worth it?

Right now vtecs arent engaging, acceleration is slow under 1500rpm and quite sluggish on a/c under 1500rpm, no system to increase acceleration when a/c is switched on, no plugs to connect any scanner for checking codes, etc.

[Spano]

Post the fresh pictures

[Maverickiz3d]

Post the fresh pictures

[Spano]

P2J ecu ?

[hornblower]

So i visited Vicky. He explained a lot of things, and plans to inspect my car starting from ecu scanning to complete wiring (or rewiring).

That would set me back at least 12k + any expense on any hardware. Is it worth it?

Right now vtecs arent engaging, acceleration is slow under 1500rpm and quite sluggish on a/c under 1500rpm, no system to increase acceleration when a/c is switched on, no plugs to connect any scanner for checking codes, etc.

Where is vicky bhai located? Does he have all gadgets with him?

[Maverickiz3d]

P2J ecu ?

yes. CVT one, not manual.

Where is vicky bhai located? Does he have all gadgets with him?

Near Disco bakery, Gulshan. Yes, he claimed to have everything. Does all mechanical and electrical work himself.

[Glioblastoma]

So i visited Vicky. He explained a lot of things, and plans to inspect my car starting from ecu scanning to complete wiring (or rewiring).

That would set me back at least 12k + any expense on any hardware. Is it worth it?

Right now vtecs arent engaging, acceleration is slow under 1500rpm and quite sluggish on a/c under 1500rpm, no system to increase acceleration when a/c is switched on, no plugs to connect any scanner for checking codes, etc.

Well going to him was worthwhile for me. But yes he is expensive. Its basically your choice, if you are satisfied with the cars performance then its okay. But looking at your post you are not happy so your choice.

I found a thread for you see if it helps.

D15b 3 stage:running a manual setup with auto ecu,done and great! - D-series.org

Did you search for the manual transmission ecu on ebay.

[Glioblastoma]

Where is vicky bhai located? Does he have all gadgets with him?

When you reach disco bakery give him a call.

[Maverickiz3d]

Well going to him was worthwhile for me. But yes he is expensive. Its basically your choice, if you are satisfied with the cars performance then its okay. But looking at your post you are not happy so your choice.

I found a thread for you see if it helps.

D15b 3 stage:running a manual setup with auto ecu,done and great! - D-series.org

Did you search for the manual transmission ecu on ebay.

I am thinking about it. Since vtecs are not engaging and vehicle's performance is not what it should be, if I dont get the required work done then I could have settled for non vtec engine in the first place. Hence, I will certainly get the work done soon since for me its a necessity.

I will check out that thread.

Not on ebay, but im having it searched in Japan...both the ecu and eg6 cluster. Cluster already found, but ecu still to be found. I am surprised the ecu is difficult to find in Japan as well

Edit: I have read that thread before. He is using a manual ecu, but he thinks its auto.

[Glioblastoma]

I am thinking about it. Since vtecs are not engaging and vehicle's performance is not what it should be, if I dont get the required work done then I could have settled for non vtec engine in the first place. Hence, I will certainly get the work done soon since for me its a necessity.

I will check out that thread.

Not on ebay, but im having it searched in Japan...both the ecu and eg6 cluster. Cluster already found, but ecu still to be found. I am surprised the ecu is difficult to find in Japan as well

Edit: I have read that thread before. He is using a manual ecu, but he thinks its auto.

Along with ebay search amazon as well, or other car parts website of UK and US. Or try contacting a pakwheeler by the name of rozzzzz. He has many engines I saw in a thread.

[Glioblastoma]

I am thinking about it. Since vtecs are not engaging and vehicle's performance is not what it should be, if I dont get the required work done then I could have settled for non vtec engine in the first place. Hence, I will certainly get the work done soon since for me its a necessity.

I will check out that thread.

Not on ebay, but im having it searched in Japan...both the ecu and eg6 cluster. Cluster already found, but ecu still to be found. I am surprised the ecu is difficult to find in Japan as well

Edit: I have read that thread before. He is using a manual ecu, but he thinks its auto.

One more thing I would advise you Xulfiqar bhai's AC person sabir, at farooq-e-azam mosque was telling back in the days he and Xulfiqar bhai used to do a lot of modifications including wiring and turbo charged applications on many cars. So he might be able to help you Sabir bhai phone 0300-2152054.

[Maverickiz3d]

One more thing I would advise you Xulfiqar bhai's AC person sabir, at farooq-e-azam mosque was telling back in the days he and Xulfiqar bhai used to do a lot of modifications including wiring and turbo charged applications on many cars. So he might be able to help you Sabir bhai phone 0300-2152054.

ok i checked on google and that mosque is like 18km away from my place. I wonder if he will be available on Sunday. Btw, you are asking me to contact him with respect to my car's AC? or everything?

Talking to him first would be better than going all the way, but I need to know what to talk to him about

Also, I forgot to mention, Vicky plans to keep my car for 3 days!

[Glioblastoma]

ok i checked on google and that mosque is like 18km away from my place. I wonder if he will be available on Sunday. Btw, you are asking me to contact him with respect to my car's AC? or everything?

Talking to him first would be better than going all the way, but I need to know what to talk to him about

Also, I forgot to mention, Vicky plans to keep my car for 3 days!

Talk to sabir bhai on phone then, not regarding your AC but regarding your wiring issue or whatever the problem is. As I mentioned he and xulfiqar bhai used to correctly wire a lot of cars. So explain your problem and hopefully he can guide you.

3 days thats a lot but if you want it diagnosed correctly then thats your best bet.

[Maverickiz3d]

Talk to sabir bhai on phone then, not regarding your AC but regarding your wiring issue or whatever the problem is. As I mentioned he and xulfiqar bhai used to correctly wire a lot of cars. So explain your problem and hopefully he can guide you.

3 days thats a lot but if you want it diagnosed correctly then thats your best bet.

Talked to Sabir. He says wiring wala will have to do it. The vacuum pipes coming out of IM will not be used, but AC RPM will be controlled via ECU only.

I asked him if he would do the job, and he said he only does AC work.

So i guess Vicky is the guy for the job. Talked to Vicky again today, he will confirm me next Sunday as to when I should take my car to him. Time to wait now.

[Glioblastoma]

Ok then lets see. In the meantime if you want someone else then pakwheeler by the name of Libra goes to this mechanic,

Workshop Name: Torque engineering.
Workshop City: Karachi
Workshop Address:163 bahadurabad block 3 street 24. Karachi
Specialty: Mechanical work
Owner Name: Mushir khan
Email: mushirahm3dkhan67@gmail
Phone: 03212435225

In the meantime talk to mushir over phone.

Hope it helps.

[Maverickiz3d]

These just came in today

[Maverickiz3d]

So I got myself an EG6 cluster, sent from Japan, used condition.

Bloody customs guys charged Rs 4,200 duty! WTF?? Is that for real? I thought there will hardly be any duty on such item