ok im back guys. The car start and running. But im really unsatisfied with the drive. With a/c, the pick is like its running on cng or something.
2 vacuum hoses coming out of the back of intake manifold are going nowhere, with screws push in at the ends of pipe to block. I assume these will go into that thing for the a/c.
On a/c, the idle rpm sometimes goes below 500 rpm, and while driving when brakes are applied, the car is stalling due to this low rpm. No issue when running with a/c switched off.
Furthermore, there are 5-6 sockets that are just lying around and not plugged into anything.
Any input will be appreciated.