CNG related problems

[dynamicallyStatic]

@Baryar
This may not have to do a lot with the cng tuning. I faced the same when I bought my daewoo, and all kinds of cng tuning/changing plug wires etc didn't solve the phatakas/jerks in 2nd gear. what solved the problem was that I took it to Federal autos and he did some oiling in the computer. That solved the problem. Take it to Daewoo point in G10 (03005575849) and he should be able to resolve it (most possibly using the resolution that i suggested).

[Vaqas1]

Ya maybe with performance wires u might feel some difference but even without them u should feel some difference

Basim if ur in pindi i can give u contact of my mechanic he might be able to help you.

[fyq]

neoq!
for all tht think , its not easy to tell u one way, cross questioning is required, so check ur email box.(sometimes mails go to spam or junk )

baryar!
yes, g-10 can solve it, coz daewoo problem are among some exceptions,u can say then special cases...

[sabir_waqas]

Dear Sir,

I have FX 1988 Model, aur bahut tang hoon Gas bahut khati hai, sunday ko check kurwai to mechanic nay kaha k k Plugs ki complete cables badalni hoon gii, so badul dalieen, lakin ub b masla hull nahin hua. tunning b kurwai koi hull nahin nikla, yani main office say 35 km per rehta hoon, aur gari main 40kg ka sylinder hai jo k her rooz subhah 140 to 200 tuk full hota hai. 140 ki dalay to b raat ko reserve. aur agur 200 ki hoo to b aglay din reserve.

Please help me out

Waqas

[fyq]

waqas!
so sry for tht, but the problem is abt cng system.
tell me brand name of kit, and wen u went for tune up, and also tell me wt have u done for tht ?

[ahmadomerch]

dear fyq

i have a Lancer 97 Model, 1300 Carb stock engine, auto transmisson with new rings and Lavato CNG kit. i have notied that the RPM is above 1.2.

the biggest issue is that the car is PICK LESS, very low pick and lots of noice, plus when i switch on the AC the pick comes down more..

so what should i do....

[sabir_waqas]

Kit name is Landy renzo, tuning time Sunday evening.

[fyq]

ahmedomerch!
make sure air intake is half bloked and plugs are properly gapped. i dun think any prob else of it....nor seems to be.

sabirwaqas!
have u drained the oil both frm kit and cylinder. if not thn do it.

[sabir_waqas]

nahin yeah to nahin kiya yeah b kur leta hoon theek ho jaye ga kisi b jaga say kurwa loon naa koi special place hai too woo b batayen plzzz

[fyq]

ksi bhee cng workshop se, fx is not a big deal for anyone.and it will solve up ur prblm insha ALLAH.

[sabir_waqas]

A Bundle of thanxx sir,

[fyq]

sabirwaqas!
mention not.

[CarAddict]

Salam,
thanks a lot bro. Can Enercon workshop solve this problem ?

[fyq]

caradaict!
enercon has sopeciality of ecu cars(efi) so for fx u can visit any cng workshop.

[Xplorer]

@fyq
Pls. comment on https://www.pakwheels.com/forumreply_az_TopicID!83052~ForumID!10~pw.html

[mwm749]

FYQ,

It was nice talking to you, thank you for your advice to me and overall which you have been sharing with all of us.
Regards

[fyq]

mwm749!
welcome man !

xplorer!
its difficult 2 tell u here, u can see connections diagram in the box of advancers. different adv hav different wires.thts why.

[xain91]

i have a platz 2004 model A/T. when the ac is on, at low speed the brake pedal hardens so brakes doesn't applly. this is major problem plz help me. this happens when rpm falls. but on abt 40km/h the brakes r right

[xain91]

i have a platz 2004 model A/T. when the ac is on, at low speed the brake pedal hardens so brakes doesn't applly. this is major problem plz help me. this happens when rpm falls. but on abt 40km/h the brakes r right

[fyq]

xain!
increase rpms both frm kit and throttle body,where possible from....