Convert ur pre/cassete player to USB mp3 player

[bulldog1993]

bro i have a cultus and i m using the original pre but it has no input at the back?

[margallar]

nice thinking.woh kehtay hain kay zaroorat ejaad ki maa hai

[farhan678]

yar i bought a mp3 modulator for 350rs from sulltan ka khu. but it only worked for 2 hour and then it is not working. when i plug it in to my car it shows a light but no display and then quickly turns off. and it also gets heated up. where is the problem? in my car or the modulator

[illusive255]

bro i have a cultus and i m using the original pre but it has no input at the back?

If u r talking about this pre in pic then it has AUX port on the front

nice thinking.woh kehtay hain kay zaroorat ejaad ki maa hai

Thnx

yar i bought a mp3 modulator for 350rs from sulltan ka khu. but it only worked for 2 hour and then it is not working. when i plug it in to my car it shows a light but no display and then quickly turns off. and it also gets heated up. where is the problem? in my car or the modulator

Problem seems to be in modulator

[mahmood]

@illusive
ok first thing first, i was sick of my Rs.350 wala modulator from day 1 as it did not save playing location and secondly its remote got down too and after motivation from your this thread i broke it today, so sara k sara ilzam aap par

will be getting a new one tomorrow and i wanna ask that the sort of AUX cable you make it got male Audio/Video sorta connectors, i got similar female connectors at backside of my KRC-265, aint these are for output from the head unit, and secondly my unit have CA-C1AUX interface for AUX, should i go for it or my interpretation is wrong regarding the pinouts you've used

[bulldog1993]

[QUOTE=illusive255;2502286]If u r talking about this pre in pic then it has AUX port on the front

i m using this pre with aux cassette and it sounds awfull

[bulldog1993]

Attention All!!!
i found that this input can also be used as an output when playing the modulator with a usb device

untitled.JPG (0 Bytes)

untitled.JPG (0 Bytes)

[alee1]

i m loving it...thanks buddy.was about to go for front usb pre...

[aghashehraz]

very nice work ..

[-infinity-]

amazing...im gonna do this tomorrow with my kenwood pre...hope that all goes well

[yawar538]

nice, work indeed and also please start working on integrating the usb inside ur casette player.

[-infinity-]

Attention All!!!
i found that this input can also be used as an output when playing the modulator with a usb device

how can u use this output point with usb

[-infinity-]

NEED HELP...there are three wires red black and white connected and on board these are denoted with v, g, a respectively...now i need to know that how aux wires will be connected to all of these
secondly...there is another strip(4wires ) comming from other chip containing usb port, does it has to do anything with required connections
thanks;p

[cracked]

i got this done..
the prob is now sound quality has improved but just on speakers.
im actually using amp n sub so they arent sounding proper..
any ideas???
mean sub may sy awazz aa re hy but very low..

[-infinity-]

ive extended wires from 4 possible points how do i attach them with aux cable and how do i know is there any aux point in my pre...there is an option of white and red input...plz help

[mahmood]

guys check this one from my side, i did something same today too

https://www.pakwheels.com/forums/d-i-y-projects/22718-diy-kenwood-headunit-aux-adaptor-2#post2507586

[bulldog1993]

@ infinity
u can use an aux cable to connect ur fm modulator to ur car pre

3_5mm-audio-extender-male-to-male-1.jpg (0 Bytes)

3_5mm-audio-extender-male-to-male-1.jpg (0 Bytes)

[-infinity-]

this is front and back image of my pre
illusive...waiting for ur reply,others can guide too ;p

[-infinity-]

@ infinity
u can use an aux cable to connect ur fm modulator to ur car pre

Sir i want to connect USB. theone i have is having these two pins(red&white) on both sides i just cut it from one and attached other with pre but doesnt know is it for AUX or not...ive uploaded pics suggest a solution

[mahmood]

@infinity
brother i am in total disagreement of soldring wires when you can use a male end of cable as said by bulldog1993,

secondly aint that the stereo input/AUX port on right side of your channel button line in last pic, if it is just stick one end of male to male stereo cable there and other to the modulator.

third i am still not getting it, those audio video sorta things at back sides are outputs, or atleast in my kenwood case they are, can anybody confirm this those can inputs aswell or can be used as inputs.

lastly your unit doesnt seems to have any AUX port in back panel