Corolla 90 Engine Swapped with 1NZ-FE DEC 2015

[haroon.virk]

1NZ is a good engine, it has good power and fuel economy. I was very happy with its performance.

[zain.hashmi]

Yes i am planning to swap R1NZ in EE111

[Hassan1991]

R1nz available in scrap yard will be cvt with electronic throttle.
If you want manual then you need v1nz transmission, ecu and intake manifold along with throttle body.

[capsat]

Yes i am planning to swap R1NZ in EE111

please start as suggested by @SER_GTR gather picture of vehicle with hood lifted in current setup.
go through swap threads by searching search glass on top right and proceed in sequence.

we all are here to help you succeed becoming petrol head

Good luck we will be 'chasing you ' -

[SER_GTR]

where is yours now?? SOLD?

[Hassan1991]

Swapped with more then double the power. @haroon.virk will tell about the engine.

[haroon.virk]

I haven't sold 1nzfe, it's still with me sitting in my parts room I swapped 2zz with Blitz SC running at 7 psi boost.

[haroon.virk]

Yes, you can say its more than double the power. You already know all the details of my build
The engine has upgraded oil pump gear.
The clutch plate and flywheel is from OS Giken.
Oil Pan is bigger compared to stock.
The engine also have a oil cooler.
I think these are the only mods to engine which I remember as of now. May be @Hassan1991 remembers any other

[Hassan1991]

Forget to mention Blitz ecu

[SER_GTR]

Glad to hear.. the oil cooler with SC really helps calm things down

nice power package MASHA'ALLAH

[haroon.virk]

Thanks.
The oil cooler needs an air duct so that it can cool much better. Still refining and sorting out small issues. Hopefully it will complete soon.

[syedwaqarhussain22]

Recently purchased a EE90, need to swap best economical Auto engine . What would be the cost in Karachi ? Currently it has 1500cc manual carburator based engine. Can share the pictures

[capsat]

XA-EFI engines will be bolt-on swap. (x is variable digit)
X-NZFE series engines will be little tricky to fit in reason being exhaust & intake manifold direction.

do your research very well before you make a decision. import of automobile scrap in Pakistan is long gone past. Engines available at scrapyards are landing there from unknown places. make sure you spend your monies carefully.

[pwuser163387897237]

Assalamualaikum all , guys currently I'm planning to swap 1NZ-FE on my Corolla AE80 which is till date was on 2A engine. As i have read this theard some guys have swapped 1NZ-FE on ee80 chassis. As I'm completely noob in this swap and by surveying market salers and mechanics have boggled my mind regarding this Swap. I want to know from any experienced person how his swapping went and any problem that he faced during swap. And can anyone recommend a good mechanic regarding this swap I'm from karachi. Thanks in advance.
@Hassan1991 sir I have seen that you have pretty good experience regarding this engine your help will be valuable for me ...

[Hassan1991]

Wailaikum Assalam
If you are really willing to swap then get.
R1nz head + block ( head assembly )
V1nz intake manifold.
V1nz wiring + correct ecu.
V1nz Fielder Airbox.
And correct exhaust headers.

[pwuser163387897237]

Wish me luck sir

[Hassan1991]

Best of luck.
Let me know if you need any help.