Cultus accident rebuild help required

[brownrose78]

@sayedgulhassan
In my opinion,just change New Bonnet while repair all other parts.
Upgrade your headlights,bumper and grills to new model
Instead of shower, better u do full repaint of your car with oven baked paint in oven booth.Use only Sikkens brand for paint instead of 2k or local.
Front windscreen has different varieties,use Gas filled safety glass.
Send engine pics to have some ideas before starting work

[sayedgulhassan]

Thanks

[sayedgulhassan]

Thanks brother i also wanted the same as other parts can be repaired but bonnet was badly damaged
I wanted to ask you some questions
1.How to handle the roof repair work can a good denter repair it enough to look as new?
2.what would be the cost of oven baked paint for my car cherry red colour?
3.where can i get the best paint job work in islamabad/rawalpindi in best price?contact or address would be greatly appreciated​
I will upload the engine pics in a couple of hours.
Thanks

[sayedgulhassan]

Bro today car is given to the denter @25k for all denting only gaddree and bonnet will be provided to the denter for body parts denting
I have updated the pics of engine bay do check them and give me advice on them
Thanks

[brownrose78]

@sayedgulhassan bhai These are 1to 1 reply of your queries:
1. Roof work if done by good denter then nobody can judge difference, it is not big task. U should stand on his head during work for close eye over him
2. Total difference between oven baked paint and ordinary paint will be 5,000 to 10,000 depending upon quality
3. Sorry bhai,I dont know about good denter/painter/workshop in Islamabad,I can guide u only about Karachi
4. Bhai, I have doubt that your chassis might be damaged so better do it align by Chassis Alignment Analyzer Machine which will balance it correct

[sayedgulhassan]

Thanks for the reply​
Bro im doing CA soo much studies and classes so i cant give much of my time for its rebuild but will try to give as much time as possible
I think the denter i have chosen is good and is also favouring your opinion in the above comments, by chasis you mean the part beside the wheel? Yes its pretty much damaged and unallighned i hope he has the machines for that work as he was expert and the workshop by whom i will overhaul engine had repaired many cars from him...he was telling that it would be unrecognizable that gave me relief
So basically oven baked paint cost would be 30-35k?
Is 25k a good deal for denter as he is denting all parts except bonnet plus if he does nicely...

[brownrose78]

Yes,35K is more than enough
25K is reasonable

[sayedgulhassan]

Thanks brother

[brownrose78]

But focus on paint brand and also use good quality hardener/potene specially during sanding/smoothing process

[nfsmostwanted]

Sad for your loss, but i'm glad that you're okay.

[sayedgulhassan]

I will confirm the brand of paint and cost before the paint process

[sayedgulhassan]

Thanks brother hopefully

[brownrose78]

@sayedgulhassan
Bhai try to take close pictures nowadays means during denting process.
This is cruical time as weak non fine lining and alignment can damage your car shape so before application of hardner/polycate you have chance to direct your denter for more finer work.
If u can share pictures,I and other members can better guide u more refinement very easily

[sayedgulhassan]

Thanks brother for the advice i will now definatily go tomorrow daily to check the work and close pics of all the denting process....
Brother i wanted to ask the price of kabuli spare part cost these days in sultan da khoo if i should buy new some parts guide me
1.bonnet japani kabuli
2.bumpers china are avaialble in 1200rs or better quality in 1800rs?grill latest?
3.side mirror should go for taiwan 450rs have changed 2 3 times in the last 3 4 months
4.gaardriii
5.headlights latest 2016 model with indicators kabuli price
6.head cover which was broken as seen in the engine pics
Thanks​

[sayedgulhassan]

Btw whats hardener polycate whats its purpose?

[brownrose78]

@sayedgulhassan
Brother, polycate and hardener r used for fine lining and making surface smoother.

Be careful if u r using kabli(i dont understand term kabli as cultus is not imported one so how it become kabli) infact they will be used parts or accidented car remaining useable parts

[sayedgulhassan]

Bro by kabuli parts i mean used parts of accidented/stolen cars which are avaialable in sultan da kho

[brownrose78]

@sayedgulhassan
Tell denter to finish asap.I have doubt that your engine will take some more expenses than our estimate because of its condition

[sayedgulhassan]

Bro engine is in the workshop, today i am going to the workshop to check for damages during the incident to the engine and then will open the engine for the condition and to start the overhaul process as it was consuming 1 litre oil in 500kms​
Car from denting would be available next wednesday thurday im going to start the engine overhaul tomorrow to get it ready till then..
I think the damages to the engine that occured were
1.headcover
2.compressor
3.timing belt side
4.shocks maybe
Compresser and ac work would be postponed to summer

[sayedgulhassan]

Work just started just a day work here
Going for spare parts now will share pics in the evening
For the purchase