Cultus EFi Check Engine Light

Tags: #<Tag:0x00000006396e48>

umarkhan1 (umarkhan1) 2014-02-06 15:46:34 +0500 #37

sorry sir but your attachment is not viewing

umarkhan1 (umarkhan1) 2014-02-06 15:48:52 +0500 #38

i have doubts on the sensor itself coz if the wiring was faulty,it will show the CEL all the time but in my case its only showing upon acceleration and goes off when i release the throttle

SER_GTR (SER_GTR) 2014-02-07 04:05:46 +0500 #39

There Are Ways To Check It...But Somehow.....Let It on HOLD Till You Don't Know Exact Procedure...You Can't Try Things Specially With LIVE Wire Feeding ECU.....!!

B.t.w Where Did The Attachment Go :\

SER_GTR (SER_GTR) 2014-02-07 04:08:23 +0500 #40

If You Get HAnds On It Easily Or Can Swap With Any Other Good One For Testing....Do It And Check....!

This Code Is For IAT Sensor Which Will Be Located Somewhere In You Air Intake Box Or Duct Or Pipe Leading To Manifold

aqibasit (aqibasit) 2014-02-07 07:56:39 +0500 #41

P0110 is for Intake Air Temperature Circuit Malfunction

mianaasim (mianaasim) 2014-02-07 08:26:50 +0500 #42

where is magic motors located and wat they charge?????

mianaasim (mianaasim) 2014-02-07 08:31:06 +0500 #43

Does ELM327 work with honda city and corolla??????

margallar (margallar) 2014-02-07 10:31:47 +0500 #44

Thry are on model town circular road. I have no idea what they charge for just ecu scan.

umarkhan1 (umarkhan1) 2014-02-08 04:53:05 +0500 #45

@ser_gtr
i found an iat sensor of toyota for 450rs from old spare parts,
Can i install it in my cultus???
shape and size is same as installed in my cultus orignally....

SER_GTR (SER_GTR) 2014-02-08 06:25:00 +0500 #46

I Won't Suggest Until I Am 100% Sure They Work Same And Have Same Readings Outputs........!!

DOn't Go For Looks

SER_GTR (SER_GTR) 2014-02-08 06:26:01 +0500 #47

In TOYOTA's They Will Work For Each Other But I Am Not Sure For Suzuki

umarkhan1 (umarkhan1) 2014-02-08 07:11:50 +0500 #48

so what do you say sir???
even the numbers printed on both of them are same...

SER_GTR (SER_GTR) 2014-02-08 07:49:05 +0500 #49

Part No Is Same?

TOYOTA IAT Sensor Looks Like This

umarkhan1 (umarkhan1) 2014-02-08 15:51:47 +0500 #50

ghor se dkhne pe pta chala k part number wasnt the same :(.....khair khareed hi lia me ne.kha ke na chala to wapis kr dnaa.
so changed the iat sensor and removed the codes..but again the same problem..
i have checked both of the sensors by connecting in series with 5 volts dc,,,
original one was giving full 5 volts what ever the temp was provided to it,,,while the toyotas was giving 4.3 volts,,,, at about 17 deg
one question..
why the CEL only glows on giving a little hard throttle on a moving car????it never glows on a stopped car even if you rev upto 7k rpm

SER_GTR (SER_GTR) 2014-02-08 16:24:24 +0500 #51

You Car have VSS Connected??? u checked it??

its quiet strange as if readings are correct..it should have been disappeared by now....!!

check that its not some other sensor messing it....your TPS or VSS...

umarkhan1 (umarkhan1) 2014-02-09 02:50:45 +0500 #52

if other sensors are messing then why code is P0110???
and i think my car has no vss,its mechanical

SER_GTR (SER_GTR) 2014-02-09 07:15:51 +0500 #53

I Advice To ASK Suzuki 3S To Sort It....Or Swap Sensor For Same Model Cultus To Know The Culprit....!

Suzuki's Can Act WEIRD And I Have No DOUBT On That......! Also Hunt For Its Service Manual On Internet Or Look On PW's

umarkhan1 (umarkhan1) 2014-02-09 17:03:13 +0500 #54

sir is it necessary to reset the ecu after putting the new sensor??
removing the neg terminal for 1 min resets the ecu or not??

SER_GTR (SER_GTR) 2014-02-09 17:42:52 +0500 #55

Remove +ve terminal for 5min in order to reset ecu....not negative

SER_GTR (SER_GTR) 2014-02-09 17:44:09 +0500 #56

if you don't want other things to reset...you call pull out Main Efi fuse for 5min also...serves same purpose

make sure its main efi fuse