Cultus engine and body overhaul and rebuild

[wakman2003]

five years mean yah hall ho jata cultas ka:-#

[agoodfriend]

this is the white color code of cultus , i will use this paint for my car , so thats all till now , i will upload the painted car pic soon , and then lot of other work to be done like interior , CV joint replace , AC repair , gear box seals replace , and many other , i will post all pic soon , best of luck

[agoodfriend]

thanks dear , i will go for the "oven bake paint booth" , i will post all the detailed pic soon,

[agoodfriend]

Masha ALLAH, very nice, good luck for the car, for the paint, try to get it done as precisely as you got the denting done, dont worry about little amount of money, that 'extra' piece of spent cash will give u smiles everytime u look at your car.

Regarding the engine, good luck with the engine overhaul, but, if u plan on swapping the engine, good luck in finding the cultus engine from the scrap market, also, the engine of Suzuki Swift Sedan 1990-1992 model is almost the same as that of cultus (carurettor version), so if u find that at a decent price, swap with that without any tension. Again, good luck and keep posting the updates about your car !

thanks dear , i will go for the "oven bake paint booth" , i will post all the detailed pic soon, i already rebuilt the same engine myself but havent take any pic of that , i rebuilt the engine with great care and with japanese spares ,

[agoodfriend]

i painted these wipers along with the plastic covers in mat finish black (flat black) , they look nice ,

[agoodfriend]

they were in pretty bad shape , damaged because of water , as there was no plastic sheild behind them which protect them from rain water , but the outer fabric was all ok , first i plan to buy all 4 of them , but the single piece cost 2200 each , means 4 will cost almost 8500 , so i plan to use them again by just changing the back lasani sheet , and this trick really works , very cheap just cost me 1000 rs for all of them , and then i cover them with plastic from out side , just to protect them from scrashes and durt , and i also plan to put the plastic sheet behid them , so that rain water wont ruin them again , it will also reduce some road noice ,

[schehxad]

dear i think it was previously driven on rent....so much job...estimated cost?

[raging_ravin]

good luck, just one suggestion, apney itni mehnat ki hai or time lagaya hai, to dont hesitate in spending that extra thousand rupees, get the best thing for the best results and the best finishing, so that when u start using the car, everytime you'll step inside it, looking at it will make u happy

[agoodfriend]

dear i think it was previously driven on rent....so much job...estimated cost?

well dear i dont know about that , i just got that car on 24 october 2011 , i guess this car is used in lahore , but the previous owner was from rwp , and estimate cost i will calculate at the end of the project , right now i mostelly mention the cost of each thing along with its pic ,

[agoodfriend]

I would advise you to remove every drop of old paint as it will create excessive weight

i will go for the over baked paint ,

[agoodfriend]

check this pic , the left one is the original and faulty switch with cap removed , and there right side is the new one , i buy that from collage road rawalpindi at the cost of just 20 Rs , they both are not 100 % same , but after a minor adjustment you can fix it ,
in this pic i have pulled out the original switch from its casing , you can clearly see the difference in both ,
another view , i cut the piece which is circled in red
after some soldering this is the final product , and it works fine all in just 20 Rs

[daniyalahmad]

cultus left fender close up view after the completion of denting , i prefer to use the old and original fenders instead of replacing them with after market , local and new fenders which are availabe in market (sultan kaa khoo / rawalpindi) at just 1500 Rs

Dont you think there is more gap between the wheel and the front bumper that normal?
And was the car involved in an accident?
The front portion of the car looks as if it has been repaired.
Anyways best of luck with the restoration.

[daniyalahmad]

i painted these wipers along with the plastic covers in mat finish black (flat black) , they look nice ,

You painted the viper blades aswell? :o

[agoodfriend]

Dont you think there is more gap between the wheel and the front bumper that normal?
And was the car involved in an accident?
The front portion of the car looks as if it has been repaired.
Anyways best of luck with the restoration.

car is not accident , but i have also noted that gap and check the other pic in which left side Y Frame is welded , that gap has been levelled after that surgey ,

[abcdabcd]

^^ pretty good job so far
Inshallah it will be good as new
What have you decided for the engine ?

hye i need to chnage or over haul ma engine whos da best in job in is/rwp who culd do dis for me i need da best mehcnic

[agoodfriend]

You painted the viper blades aswell? :o

no dear , i have removed the rubber blades before paint ,

[daniyalahmad]

^ Okay.
Best of Luck with the project!

[mobi2000pk]

how much the dentor and painter will take in total , it should be arround 45000. if they will use standox and glaso material.
Please make sure paiter uses best material otherwise your all efforts will be wasted as final look comes from paint.

dont try painter get your car painted from some one experienced

[mobi2000pk]

Good nice work, please share the cost that will help

[mobi2000pk]

For paint work check it with honda center workers they do honda paint in cheap rate uses same material those guys are in rawalpindi num 03225002066.