Cultus engine and body overhaul and rebuild

[agoodfriend]

hye i need to chnage or over haul ma engine whos da best in job in is/rwp who culd do dis for me i need da best mehcnic

well dear i have no info about mechanics because i never take my car to work shop (other than denting and painting) , i do all the work my self , but i have an old mechanic through which i repair my car in mid 90s , he is in national market rwp ,
i can tell you about the machine shop (kharadiya) , i do all the work from him and his work and prices are batter than others ,
one thing always remember , never trust any mechanic , carry out all the work in your pressence including machine work and but all the spare parts on your own and make sure mechanic uses the same part you supplied to him ,

[agoodfriend]

how much the dentor and painter will take in total , it should be arround 45000. if they will use standox and glaso material.
Please make sure paiter uses best material otherwise your all efforts will be wasted as final look comes from paint.

dont try painter get your car painted from some one experienced

many thanks for the suggestion , well i am going for a oven bake paint , paint wil be of good quality (2K) , the work shop has its own paint lab , i will show its pic tomorrow , and about cost i will calculate it at the end

[Majid1]

cultus front head light left side along with the indicator , both are after maket but of good quality ,

What is the price of cultus front head light & indicator?

[agoodfriend]

What is the price of cultus front head light & indicator?

i havent buy the head lights so cant quote you there prices , i will let you know in my next visit at parts store , indicators costs 700 for pair , they are really of good quality and close to genunine ,, shop keeper says its made in taiwan , and there are another quality which was cheaper and of slightelly low quality , they were chinese made and costs 500 for pair , i am not sure of there origian ,
the difference between chinese and taiwan made is this that chinese one came with orange bulb and holder , where as taiwan made wont , and bulb and holders cost 100 for pair ,

[Xulfiqar]

they were in pretty bad shape , damaged because of water , as there was no plastic sheild behind them which protect them from rain water , but the outer fabric was all ok , first i plan to buy all 4 of them , but the single piece cost 2200 each , means 4 will cost almost 8500 , so i plan to use them again by just changing the back lasani sheet , and this trick really works , very cheap just cost me 1000 rs for all of them , and then i cover them with plastic from out side , just to protect them from scrashes and durt , and i also plan to put the plastic sheet behid them , so that rain water wont ruin them again , it will also reduce some road noice ,

Do yourself a favor and remove this ugly plastic that you have put on the door cards, makes it look like a run down taxi.

And use this same plastic for the door moisture barrier sheet, The black glue can be found at windshield repair shops, ask them for the long ribbon type sticky rubber.

If you can find thin natural jute (2 or 3mm) paste it to the back of the door cards, it will cut down noise

[agoodfriend]

Do yourself a favor and remove this ugly plastic that you have put on the door cards, makes it look like a run down taxi.

And use this same plastic for the door moisture barrier sheet, The black glue can be found at windshield repair shops, ask them for the long ribbon type sticky rubber.

If you can find thin natural jute (2 or 3mm) paste it to the back of the door cards, it will cut down noise

many thanks for the suggestion , i will definitely consider that , i really dont know about that sticky rubber strip , my plan was to use black silicon instead of that but now i will seach for it ,

today i visisted sultan kaa khoo , i was looking for power windows , i make a deal with one brooker , tomorrow i will go for it and will share the entire process snaps ,
thanks again

[Xulfiqar]

with silicone you would need to remove and reapply all the silicone and the plastic sheet will tear on removal because RTV is tough, The black strip is tacky yet you can unpaste/paste the sheet many times if the glue remains clean.

[driver_guy]

with silicone you would need to remove and reapply all the silicone and the plastic sheet will tear on removal because RTV is tough, The black strip is tacky yet you can unpaste/paste the sheet many times if the glue remains clean.

i have seen this in cuore. They apply a plastic sheet with black sticky paste around the boundary of the sheet. But its of little use bcus water trickles alongside window glass and into the door hollow due to poor local fitting of rubbers.
I wonder why local assemblers treat smaller cars like rikshaws

[Xulfiqar]

i have seen this in cuore. They apply a plastic sheet with black sticky paste around the boundary of the sheet. But its of little use bcus water trickles alongside window glass and into the door hollow due to poor local fitting of rubbers.
I wonder why local assemblers treat smaller cars like rikshaws

its not just cuore etc, its every car in the world, no matter how expensive or cheap - all cars have that moisture barrier sheet to prevent water from destroying the door cards.

[DANY_KHANN]

Do yourself a favor and remove this ugly plastic that you have put on the door cards, makes it look like a run down taxi.

And use this same plastic for the door moisture barrier sheet, The black glue can be found at windshield repair shops, ask them for the long ribbon type sticky rubber.

If you can find thin natural jute (2 or 3mm) paste it to the back of the door cards, it will cut down noise

do you mean the rubber like thing what was used in some old cars for water proofing the lights.
is it available in Pakistan?

[Xulfiqar]

yes - its made by 3M but you can find chinese copies of it in Pakistan.

[DANY_KHANN]

^^^ i am in search of that from a long long time.

[DANY_KHANN]

buy chance do you know the exact or local name of that stuff.

[Majid1]

waiting for pictures of power windows . :S

[agoodfriend]

waiting for pictures of power windows . :S

helo dear , please wait atleast 1 week , my painter has delayed the paint job , today i visited the work shop and i guess it still need 5 to 7 days , i will dafanetelly post each and every thing , these days i working on LED lights , i already make all lights and speedo meter LED , now just left with tail lights , any suggestions for LED lights please gave me , thanks

[capsat]

buy chance do you know the exact or local name of that stuff.

in pakistan it is called 'tarkol tape' in zurich it must be known as 'black adhesive'l

[chinyoti]

helo dear , please wait atleast 1 week , my painter has delayed the paint job , today i visited the work shop and i guess it still need 5 to 7 days , i will dafanetelly post each and every thing , these days i working on LED lights , i already make all lights and speedo meter LED , now just left with tail lights , any suggestions for LED lights please gave me , thanks

LEDs in the meter are okay, keep the outside as orignal as possible, if you want to add extra lights only then go for LEDs

[DANY_KHANN]

in pakistan it is called 'tarkol tape' in zurich it must be known as 'black adhesive'l

thanx brother

[shazaryab]

Good going poster, I am cultus owner too. Please keep posting.It will be a great help for others "cultosians" if you could mention the prices of item you buy and also the shop where you bought them from.By the way where are you getting the denting and painting job done from??
GOOD LUCK

[shazaryab]

Thread subscribed!