Cultus G13B Swap

[tahahussain1995.th1]

Hi I need some information? Can I swap Cultus 2000 shape engine with G13B? Is it bolt to bolt fitting? What issue will I face? And what will be the fuel average ill get?
Can some one help me?

[Salmaanawan]

Yes it will be bolt on, average will improve as I used to get around 11-12 km/L in my Baleno. Cultus is lighter. But you'll also need to upgrade your brakes.

[tahahussain1995.th1]

Can yo help me in detail like what upgrade brakes will require?

[Salmaanawan]

Jdm swift, rotors, hubs and calipers might fit and improve brakes signficantly. Also a bigger brake booster might also help. I have no experience with cultus so I can't give any specifics, but everything can be done. Where are you located?

[tahahussain1995.th1]

Karachi

[Salmaanawan]

Also keep an eye on g15a it will give you more power and better mileage, both are bolt on swaps. But keep in mind that you'll have to change other parts too such as fuel pump, intake manifold, injectors, wiring, ecu.. it's going to cost you and finding a used engine in good nick wouldn't be so easy either.

@margallar

[tahahussain1995.th1]

Oh thanks alot Ill definitely require your expertise when ill start.

[Djaymx]

Thinking about doing a swap myself, I have plans for a 2005 Cultus which engine and transmission should I go for if I want an auto.

[Salmaanawan]

Sir if you are located in Islamabad cotact @dani_kk
I've seen an M13 with in auto tranny in Suzuki Alto on the forums, it must be possible in cultus too after alteration.

[Salmaanawan]

No sir, I am not an expert, I am noob garbage. However I will advise you to the best of my abilities.
Experts are @Xulfiqar @capsat @margallar @hassan1991 hope they can guide you even better.

[Hassan1991]

Yes, nothing is bolt on actually but any G series will without hassle.
You can fit baleno or swift Gti brakes.

[tahahussain1995.th1]

Is there any way to check that engine is Japanese or Malaysian or Singaporean? Because I am planning to swap G15A as it has good fuel average and more power?

[Hassan1991]

Don't know that about suzuki. But in honda and toyota ecu part number can tell you region.

[capsat]

locate the suzuki motor swap thread of @rozzzzz @HaroonBadshah94

G15A click is good only if you get a reasonable engine ( as in compression of over 160 PSI )

[margallar]

yes it is almost bolt on, slightly more work if it is a carby cultus. that one will need redo of fuel lines and change of fuel pump

[Djaymx]

fuel lines and fuel pump shouldnt be too much of a hassle, the exhaust assembly has to be replaced which is quite a bit work than simple installation, Only thing that concerns me with this project is the reliability of the mechanical work and frequent workshop visits afterwards it simply makes no sense unless you know the stuff yourself relying on mistri ustaads is like going to the peer sahab and never getting cured.

[engnr.mubashir]

A good mechanic with sound knowledge of engine swapping charges minimum of 30 to 35k in karachi.

[Djaymx]

Is there any way to fake those numbers? Scrapyards are notorious for jugads when "check warranty" is basically the threshold set for engine reliability

[capsat]

Is there any way to fake those numbers?

no sir compression test figures can hardly be faked if you know how to do it & who is doing it