Cultus Speedometer not working after Car wash and Check engines lighten up

[cyclone655]

Cultus Speedometer not working after Car wash and Check engines lighten up need guidance to locate and clean the sensor or fuse which can fix the issue thanks (location karachi)

[anon35615524]

Did you wash the engine bay?

[cyclone655]

Yes engine bay was washed after covering some electrical points by shoppers to prevent it from being wet, its Cultus old shape 2015 model efi euro 2

[anon35615524]

Brother from next time, do not have the engine bay washed via pressurized water, etc.

I fear, some water has ingressed in sensitive areas.

[anon35615524]

Now for the time being, have your engine bay properly dried via air blower, pressurized air, or by exposing engine bay to the sunlight (after opening the bonnet).

Especially dry the areas where coils are there (like coils leading to spark plugs), different connector areas, wirings, open the lid of the fuse box(es) and dry them too, etc.

I hope, all above helps, and your issue gets resolved. If not, take your car to some good garage, and have the issues sorted out. Thank you.

[cyclone655]

Noted thanks

[hafizmijaz]

AoA. I have cultus efi 2007 model on petrol. While driving I noticed that on applying breaks the speedometer stopped and check engine light goes on. Plz guide me what may be the issue and possible solution if I wanna do it myself

[omersiddiqui5482]

Have the car scanned @hafizmijaz

[hafizmijaz]

Not yet bro. Is it necessary? I mean i know that check engine light turned on due to stoppage of speedometer. So scanning se speed sensor error k elawa b kuch information aa sakti ha kya?

P.s: sorry if my question is not logical. I'm new to field of vehicle and I learning from pakwheels and YouTube.

[omersiddiqui5482]

having the car scanned will let you know what exactly is wrong with the car which is what System Diagnostics is for. it is much better than throwing parts into it without knowing the actual fault!

Also if you can unplug/ unbolt the VSS yourself apply some contact cleaner to it and the try!

[MK77]

I am having issue in car speedometer after I got battery terminal unplugged and then plugged again. The speedometer is now showing blank "--.--" in range parameter of Multi information display. The fuel in car was filled complete tank two days before and car was not driven more than 10 kms. Is the ECU is reset and will calculated new range after some driving? I thought it should have displayed reset range computation after re connecting the terminals.

Cultus 2018 new shape, 20,000 kms odo, 35 liter full fuel refilled.

Kindly suggest.

[MK77]

^^ ??

Anyone can help with new cultus meter MID issue?