Cultus starting issue after resting for few hours

[ahsan.pmd]

Cultus carburator 2006 model has trouble starting in the morning or after resting for many hours. I have to turn the ignition quite a few times and pretty longer to get the engine start. One more thing that if I press the accelerator pedal even a little the car wont start. When starting it only starts it I don't press the pedal. The car is on petrol. Plugs are fine. What else component to look at?

[margallar]

Vacuum pipes are most probably not connected properly and carburetor linkages may need lubrication too

[ahsan.pmd]

So actually it was loose nuts of cylinder head and it seemed that the water from the channels entered the plug area and resulted in starting issues. So after the head nuts were tightened the problem was gone.

[Xulfiqar]

Who is your mechanic? Cylinder head left loose enough to leak coolant must have been boiling it too.

[ahsan.pmd]

It happened after head gasket was changed. I guess initially he may have tightened but after some time the problem started and I just thought myself to get the head checked from another mechanic and he found that nuts were quite loose.
Xulfiqar bhai unfortunately all mechanics are almost same. They had learnt things by working under ustaads since their childhoods and when they grow up they themselves become ustaads. Though some are skilled and good at their job but still will no proper knowledge they are mostly jugaaris and follow a hit and try methodology.