Custom Paint: Wheel and the Caps!

[manofpk]

Step 1: Clean wash with soap

step 1: Paint in the middle any color matching the car ( would look great)

step 2: Put a masking tape over the proper circular part just painted.

step 3: Paint the entire thing black.

step 4: Remove the tape

step 5: Paint the logos, earlier removed (same color as the base)

dry the paint in each step !!!!

finally it will look like this :d

.... So when you are putting a new wheel caps... How about the rims..

step 1: Clean it with a dry clothe, rub it with it. Remove any dust

step 2: Put the tape on the wheel nuts and on the air inlet if required

step 3: Spray the paint in the circular motion. 2 coats

and it will look like this :d

good luck... Do it yourself

what you need :

1. Masking tape : 1 pc
2. Spray paint black 2 bottles 400ml
3. Spray paint red 1 bottle
4. Some new papers and protection.
5. Elfy