DIY: 2LTE 1991 Prado Engine Rebuild

Tags: #<Tag:0x0000000ae6b360>

Rummat81 (Rummat81) 2012-11-01 13:13:09 +0500 #1

Hello Guys,

I recently rebuild the engine on my truck.
All standard sized New Piston Rings, Bearings, Rebuilt injectors and seals etc were used.
I have had this truck for 6 years now. It was low in compression between 350 and 380 PSI.

I originally posted the thread at Ih8mud forum. the link is below with all the pics.
2LTE LJ78 Engine Rebuild
All work was done by me and my neighbor helped me with measurements and taking it out..
My wife helped me when putting it back in.

Hope you enjoy.
Any questions, please do ask.

mfdarvesh (mfdarvesh) 2012-11-01 13:30:15 +0500 #2

Very good
You are an expert mechanic
How about opening a virtual Mechanic Shop on Pakwheels

Rummat81 (Rummat81) 2012-11-01 16:00:45 +0500 #3

Pakwheels is all about that, with many enthusiasts who are helping solve issues.

SER_GTR (SER_GTR) 2012-11-01 16:15:18 +0500 #4

Love To See Someone Doing Stuff Like That....!!

This DIY Is In My Wish List But Lack Of Accessories Needed Keeps Me Away From It...!!

Rummat81 (Rummat81) 2012-11-05 14:23:19 +0500 #5

Mode Request: Is it possible to move this thread to the 4x4 section.
I feel it would get more exposure that way, due to the audience involved.
Thank you.

Awais_jan (Awais_jan) 2012-11-05 15:02:17 +0500 #6

nice project
but 2L TE is not a good engine . due to heating issue on AC ...