Diy: Cf wrapping interior handles of swift

[FarhanAnwarKhan]

So bought some black cf wrap from JZ bhai some time back and wanted to cf wrap my swifts interior door handles and finally did it 2 day....also decided to get the handbrake tightened up a little.....

[AsadIshaque]

That is a pretty neat job. Good work!

Is that a hair dryer we see in one of the pics?? You may do a short writeup on the method you adopted for better guidance to someone who wants to follow in your footsteps.

[margallar]

bhai jan yeh speakers (front door) kitnay inch k hain?
good job

[FarhanAnwarKhan]

thanks ...yup its a hair dryer which i stole from my mother...:P..the method is simple just requires alot of paitence first just clean the surface for any dust particles then cut a piece according to the surface area then apply evenly by removing any air bubbles do use a liitle extra paper for the bends on the edges using dryer heat evenly and press down with your fingers easy done and then cut out the extra with a blade...

[FarhanAnwarKhan]

bhai jan yeh speakers (front door) kitnay inch k hain?
good job

bro i have no idea as these are the stock speakers but have quite the bass punch for stock speaker better than my rolla's...

[shahi18]

wah dada again a clean piece of DIY......some more pics plz

[FarhanAnwarKhan]

wah dada again a clean piece of DIY......some more pics plz

thanx lil bro ..BUS BISMILLAH parha or shuru hoe gaya...soon more pics as i only had little time to take pics u have to heat the stuff constantly to get a clean look...

[umer325]

Nice work bro.

bhai jan yeh speakers (front door) kitnay inch k hain?
good job

Safdar bhai jan yeh jo speakers hain yeh 6 inch k hainn..

[Shehrozeae101]

nice work bro...this wrapping was my second option in corolla...but i went for body matched trims with clear coat

[FarhanAnwarKhan]

nice work bro...this wrapping was my second option in corolla...but i went for body matched trims with clear coat

it also look nice bro same is in my 2010 rolla but after some time with use it wears off.....so also had it cf wrapped in silve...

[hassanazeem]

Just a question regarding the surface you have applied these Vinyl stickers on... Were the plastic panels in Matt finish or gloss...

I tried some CF wrap on a dash panel with matte finish and it wouldnt hold... i was told to use sand paper to make the surface smooth so that it would stick... any experts here who could shed some light on this plz??

[AmirBilloo]

Excellent ......... looks like straight from factory ...

[Shehrozeae101]

thats the point of clear coat it wont wear off...... its the cars paint actually...when the car was being coloured the panels were also given to the painter......first primer...then paint.then clear.....although cf is a good job........will also give a try some day.......

[FarhanAnwarKhan]

Just a question regarding the surface you have applied these Vinyl stickers on... Were the plastic panels in Matt finish or gloss...

I tried some CF wrap on a dash panel with matte finish and it wouldnt hold... i was told to use sand paper to make the surface smooth so that it would stick... any experts here who could shed some light on this plz??

depends on the quality of the cf wrap bro i have done on both my ride matte and gloss finish gloss one is atleast one year old now and no problem's and this one is in matte finish applied well and easily and will tell u its result afterwards...as this cf was bought from jz bhai whom said him self that he has used it on his ride for 2 years now and no problem's till now.....

[FarhanAnwarKhan]

thats the point of clear coat it wont wear off...... its the cars paint actually...when the car was being coloured the panels were also given to the painter......first primer...then paint.then clear.....although cf is a good job........will also give a try some day.......

bro the factory one of rolla's are simple paint no clear coat so the handles are CF'd and centre console i did with rubbing compound to give some shine and long lasting also DIY now almost 2 years going well still have that rubbing compound...:P...

[Shehrozeae101]

^^^Good for you bro

[JIMMYrox]

bro i have no idea as these are the stock speakers but have quite the bass punch for stock speaker better than my rolla's...

i do not agree with u ... i also have a swift ... and my experience is really bad with these stock speakers .... they produce the cheapest sound quality

[CutePoison]

Excellent DIY

[dmszack]

Can any one tell me from where can i buy CF Vinyl i.e. Carbon Fiber Sheet in Karachi ?

[aximaxim]

Can any one tell me from where can i buy CF Vinyl i.e. Carbon Fiber Sheet in Karachi ?

Tibet Center.... go to any stall from where you get your windows tinted....they have CF vinyl......a fellow PW wrapped his whole motorcycle in this stuff