DIY of smoked back lights of Lancer (zxmco125)

Tags: #<Tag:0x007fb5e48e6790>

zxmco125 2011-11-26 17:07:26 +0500 #1

Hey dear fellows. Salam alikum. How are you. Me and sameer3389 did a DIY on backlights of Mitsubishi Lancer. Which most of you know is belong to me Alhumdulilah... Here are the pictures you can see

First it was look like this...

zxmco125 2011-11-26 17:08:39 +0500 #2

Lights removed for starting a DIY.

zxmco125 2011-11-26 17:10:03 +0500 #3

Left side light...

First i remove the black tape from its bottom.

zxmco125 2011-11-26 17:10:37 +0500 #4

right side.

zxmco125 2011-11-26 17:12:37 +0500 #5

Glass removed

zxmco125 2011-11-26 17:13:57 +0500 #6

applying masking tape

zxmco125 2011-11-26 17:15:01 +0500 #7

stage 2

zxmco125 2011-11-26 17:16:45 +0500 #8

stage 3

zxmco125 2011-11-26 17:17:22 +0500 #9

Masking Complete

zxmco125 2011-11-26 17:18:27 +0500 #10

applying paint

zxmco125 2011-11-26 17:19:20 +0500 #11

Paint done..

zxmco125 2011-11-26 17:19:57 +0500 #12

Removing tape

zxmco125 2011-11-26 17:22:50 +0500 #13

How is it look.

zxmco125 2011-11-26 17:23:38 +0500 #14

tape removed.... TADA

440 (440) 2011-11-26 17:24:17 +0500 #15

nice job

zxmco125 2011-11-26 17:24:35 +0500 #16

Applying paint on 2nd one

zxmco125 2011-11-26 17:25:09 +0500 #17

Buff time for shine on glass

zxmco125 2011-11-26 17:25:44 +0500 #18

TADA.... Done... Masha Allah looks sweet

atif11 (atif11) 2011-11-26 17:43:41 +0500 #19

And how did u remove the glass cover and seal it back ?
Used heat gun ?

Nice job !

zxmco125 2011-11-26 18:03:01 +0500 #20

@atif11
glass is removed by lights mechanic. and fix and sealed by silicon.