Driver Side Airbags

Tags: #<Tag:0x007f87b0c478d8> #<Tag:0x007f87b0c47798> #<Tag:0x007f87b0c47608>

timekiller1985 (newcar) 2022-05-04 03:30:58 +0500 #1

Asalam-o-Alakum

I have Honda Vezel 2014. I was invovled in an accident from the driver side and the airbags at driver side was deployed. Now I wants to where can install new airbags in Peshawar. Is Honda Services/Showroom my only option?? Also how much does it normally cost to fix the Driver Side airbags only. Please advice.

Xulfiqar (Xulfiqar) 2022-05-04 04:08:12 +0500 #2

You will need a new steering wheel airbag unit and inflator and a new airbag ecu, the ecu is then programmed to the car, your old one will be bricked and frozen with the snapshot of data from time of accident.

Get both of these from the dealership showroom, dont try to half ass this repair.

timekiller1985 (newcar) 2022-05-04 19:18:26 +0500 #3

Thanks for the reply. My steering wheel airbag is intact. Do I still need to change it?? If yes how much would all of this (the items you mentioned) costs approx??

Xulfiqar (Xulfiqar) 2022-05-04 19:21:26 +0500 #4

you need to change the deployed airbags with brand new parts and then get a new ECU for the airbags, Honda is the only place that will sell you the new SRS-ECU unit and airbag modules. You will also need a few bits and pieces from the interior too.

Call a dealership showroom and ask them to give you a quote.

Its usually an insurance claim where I live. Airbag replacement cost can be very expensive as they are quite expensive to transport.

timekiller1985 (newcar) 2022-05-04 20:02:51 +0500 #5

Thanks alot

msabbasi (msabbasi) 2022-05-05 12:36:22 +0500 #6

In addition to all the above you may also need the seat belt pre tensioner. There is an explosive charge that goes off during the accident that pins the occupant to the seat during the crash. Having your vehicle scanned with the correct scan tool will alert you if the seat belt tensioner needs to replaced. Additionally some dealers also replace the horn ring. Don't know why but they do.

timekiller1985 (newcar) 2022-05-05 20:21:30 +0500 #7

thanks I would keep this in mind.

Xulfiqar (Xulfiqar) 2022-05-10 23:35:03 +0500 #8

The horn ring is actually the ribbon belt that connects the car to the steering wheel airbag,

Its a standard replacement after an srs repair job to make sure no errors pop up later,

If any pins are to be reterminated in a wiring plug for airbag then gold plated contactors are used rather than the usual tin plated ones.