EFI engine actuators tester

[ecu_designer]

I have designed three different intelligent testing devices for testing of vital EFI engine actuators

-IAC valve tester
It can check any generic rotary/solenoid type IAC valve and performances the following tests within seconds: High Impedance, Low Impedance, Current flow monitoring, Back EMF mismatch detection and mechanically stuck valve flapper.
Other than testing it can control the IAC valve position for easy valve servicing and function verification.

demonstration video
https://www.youtube.com/watch?v=JKHwzeWK2D0

-COP coil Ignition tester
It can test the Toyota 4wires COP ignition coil and performances the following checks misfire detection, spark leakage, coil open/close, coil HV strength.

demonstration video
https://www.youtube.com/watch?v=uFBnItjksVQ

-ETCS Tester
It tests the ETCS in close loop with feedback redundant Hall Effect type position sensors and controls the throttle position for throttle body servicing and testing.

demonstration video
https://www.youtube.com/watch?v=LvMBMKl4APY

Regards
Asad

[RN100]

Very nice. You are one of very few intelligent, "real" Engineers here at this site who actually knows what he is doing. Otherwise there are many so called experts here that give have opinions which they pass as experts in Automotive Engineering. Does this device work with Honda Accord, 2004. Can it get data from OBD output.

[SER_GTR]

Nice Effort Put There....!

[zaeem9236]

Great work!!!
i have 2 questions:

1) did u use autocad for making this animated circuit diagram?
2) did u made this animated circuit diagram before building the real circuit?

[ecu_designer]

Great work!!!
i have 2 questions:

1) did u use autocad for making this animated circuit diagram?
2) did u made this animated circuit diagram before building the real circuit?

1) i have used Proteus 8 Professional 3D Visualizer

2) Yes before making the real circuit i did all the simulations & 3D visualization

[afnan.bashir]

Kudus Impressive