Engine swap

[pwuser160567626374]

what sports engine can swapped in khyber 1999(140or more bhp)

[pwuser155463632365]

Assalam walakum bro i recommend a k serice swap as it is a Honda engine it is used in civie,type r's and may other Honda's so you can find the parts in pakistan,also have an option of importing performences parts.These engine's are good and powerful and also easy to mod/find and you can easy make at least 150 or more. Thanks this is just my opinion i have not tryed this setup myself.

[Hassan1991]

Swap a suzuki g16.

[shiekh123]

honda is not suitable in khyber.
It's really hard to fit in a honda engine because of its dimensions and it requires serious mods in the engine bay.

try Toyota engine 2nzfe or get a G series engine installed with 15A or 16A. both Suzuki engines are like bolt-on fit in khyber with very little mods.

they produce ample power and are economical too.

let me know from which city you are so that can guide you more?

[brownrose78]

2nz-fe... What type of modifications will be required? Will it not be heavy for poor Khyber chassis?

[Hassan1991]

2nzfe weight less then 100kg.
You swap that keeping stock shocks height will increase from front. Because it's very light.
2nzfe and 1nzfe are very good options.

[brownrose78]

@Hassan1991
What about axle and mounts?

Apparently, 2nz-fe occupies more space than G10

[Hassan1991]

Yes you can say that because it's Efi. But aluminum makes it light.
Have to make combinations. Inner cv joint of toyota. Outer cv joint of suzuki. Then custom axles made not welded.

[pwuser160567626374]

im from lahore

[pwuser160567626374]

how much will this all would cost

[pwuser160567626374]

i have a friend selling 4AGE but i havent seen the enigne so i dont know the condition but will it fit inside khyber

[Hassan1991]

Which 4age is that? Share it's detail.

[Hassan1991]

Should be done in 150-180k bracket.

[shiekh123]

you may visit caregar restomods in johar town lahore.
you may visit his youtube channel to look for his mods that he did for his own khyber.
his youtube channel is "carastaniyan"

[shiekh123]

i've heard someone recomending 4afe for khyber but i dont think it will fit that easily in khyber.

[Hassan1991]

It will fit. But 4afe is heavy and very old now.

[shiekh123]

how do you compare 2nzfe with G15A. which one is more better

[Hassan1991]

G15a is easy to swap. But based on old technology. Expensive as well. Heavy in weight. And More power output then 2nzfe.
2nzfe is tricky to swap. Based on newer technology.
Not that expensive. Light weight. Less power output then G15. Will return better mileage which every one needs.
It's better to compare 1nzfe vs G15 as both are 1.5. In that case 1nzfe is much better.

[shiekh123]

ok then is 1nz easy to be swapped in khyber?? or it is still tricky like 2nz

[Hassan1991]

Same like swapping a 2nzfe. Both have similar mounts. Any engine other then G series will be tricky for an inexperienced mechanic.
The right way to swap a different engine is to make custom brackets for mounts. You don't have to mess with original chassis mounts brackets. You can make brackets to fit mounts of newer engine and bolted them with chassis or fit with the engine and then bolted to original chassis brackets.
Like an adopters.