Engine technology difference between 1.3 and 1.5 city

[Ussamah]

Is there any technological difference engines of homda city 1.5 and 1.3. or the difference so just in bore size. I would assume that 1.5 is technically advanced as it is relatively new compared to 1.3

[hondacityjan17]

As far as I know, there is not difference

[Hassan1991]

Power outputs of both engines are different.

[arsalaanali89]

Same technology, just the engine capacity and the power figures are different

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[anon35615524]

In Honda City 1.3:
Engine: L13Z1 i-VTEC
SOHC 16 valve i-VTEC
Displacement: 1,339 cc (81.7 cu in)
Bore x Stroke: 73.0 mm × 80.0 mm (2.87 in × 3.15 in)
Compression Ratio: 10.5:1
Power: 73 kW (99 PS; 98 hp) / 6,000 rpm
Torque: 128 N⋅m (94 lb⋅ft) / 4,300 rpm
(Source: https://en.wikipedia.org/wiki/Honda_L_engine#L13Z1_i-VTEC )

In Honda City 1.5:
Engine: L15A7 (i-VTEC)
SOHC 16 valve i-VTEC
Displacement: 1,496 cc
Bore x Stroke: 73.0 mm × 89.4 mm (2.87 in × 3.52 in)
Compression Ratio: 10.4 : 1
Power: 88 kW (118 hp) / 6,600 rpm
Torque: 145 N⋅m (107 lb⋅ft) / 4,800 rpm
(Source: https://en.wikipedia.org/wiki/Honda_L_engine#L15A7_(i-VTEC) )

[Ussamah]

How come 1.5 have lower cost.pression ratio than 1.3. as per my information 1.5 has bigger bore than 1.3. more area means more air means higher compression ratio.

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[Ussamah]

So which one is better??

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[Ussamah]

Sorry but isn't mileage and fuel economy the same thing.

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.