Improves parking safety. Detection in all directions without dead angle.
Minimize bumper damage. Totally built-in installation without impair overall appearance.
Indicates object distance with different beeping frequencies. The sensor antenna activates 3 types of acoustic
signals during approaching an obstacle at different distances.
A continuous sound of Beep approximately between 0-0.3m
A short interval sound of Beep approximately between 0.3-0.5m
A long interval sound of Beep approximately between 0.5-0.7m
Simple and concealed installation. The sensor antenna is entirely installed
inside the bumper without any drilling work.
Maintenance free, no cleaning or washing is required.
Fit for any car, truck, RV or mini-van. Peel & Stick Antenna foil tape
sensor for vehicles bumpers.
Wires to Reverse Lamp (12 Volts DC)
High output Piezo buzzer alert you with a beeping sound
Detects object at 3 feet or less
PD1 Rear parking sensor provides your car with full rear bumper protection when parking and reversing, alerting you to approaching objects via an audible speaker.
When reverse gear is engaged the PD1 Rear parking sensor provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your rear bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different audible tones (Zones) alerting you of your proximity in relation to surrounding objects!
The full length of your bumper (including the sides) is protected with an ever increasing beeping sound.
As you reverse, Zone 1 (furthest away from your vehicle) detects the approaching object first.
Zone 1: 80 to 50 cm in length - The 1st tone signals with a slow "be-be-be" sound
Zone 2: 50 to 25 cm in length - The 2nd tone is a faster "be-be-be" sound
Zone 3: 25cm and less - the 3rd tone is a constant "beeeeeep" sound
For More Information About That Please Visit Http://www.Parkingdynamics.co.<wbr>uk
This Sensor Dont Require Hole in bumper
