F2000 or kenwood excelon KAC-x811d

[Pincaaf]

Which one is better for 2 d2s?
1. Solid Audio f2000
2. Kenwood Excelon KAC-x811d

[devils_smile]

u will be connecting ur subs in a 2ohm configuration......

now v need around 800rms @ 2 ohms

SO the specs u need to know of both amps:

1) Kenwood = 919 watts RMS x 1 at 2 ohms (if u connect ur subs in parallel, each will be getting around 459 rms under ideal cases with proper wiring and a trouble free battery and alternator)




2) F2000 = 350 watts RMS x 2 @ 4 ohms (u can connect both subs separetly on each channel, both will be getting 350 rms each)

POINT's TO NOTE:

1) The kenwood is a mono and the SA is 2-channel. Monos are more efficient in tearms of power being given to ur subs

2) The kenwood is a CEA approved amp.. meaning it will do the wattage mentioned

3) SA's are over-rated. Also being a 2-channel, dnt expect that ur subs will be getting all of that 350 rms

Conclusion: The kenwoods a better choice amongst these 2... :D

[Pincaaf]

Hey thanx brother
another help needed..
can i connect a 306d2 and a 308d2, both with kenwood?
will there be any problem?

[devils_smile]

u can but it's not advised...... Simple reason being they have different specs.

don't get inspired by those who have 1 kenwood and 1 xplod sub in a single box or 1 pioneer and 1 kenwood..... your just gonna destroy your music environment

[guesswhoami]

u can but it's not advised...... Simple reason being they have different specs.

don't get inspired by those who have 1 kenwood and 1 xplod sub in a single box or 1 pioneer and 1 kenwood..... your just gonna destroy your music environment

Right to. Actually people wants not to hear himself but hear others or just create loud noise rather than decent music. So that they not to even bother either of their subs creating good music or just noise.