Fitting honda access door visors to 1996 civic

Honda

Fit

door

Tags: #<Tag:0x00000006b2d2b0>

nfssaad (Saad Ahmed Khan) 2013-07-01 17:29:08 +0500 #1

hellos...

honda accessories sells these door visors with the required hardware for around 200$...

magic lamp has the same visors for a whopping 41000rs !!

i found these on olx, bought them for 2000

not really in the best of condition.. plenty of scratches..

the plastic pins holding the clips are all worn out..

the clips were bent out of shape which i reshaped using reference pics from the net

2 clips were missing which i fabricated from a tin can

nfssaad (Saad Ahmed Khan) 2013-07-01 17:33:52 +0500 #2

for reference pics the link :

JDM EK4 Civic Ferio 4 Door Sedan 96-00 Door Visors Kit

nfssaad (Saad Ahmed Khan) 2013-07-01 17:38:54 +0500 #3

How-To Install Honda Access Sedan Window Visors ok EK - Honda-Tech

[DIY] - How To - Honda Access Window Visor Installation on an EK - Honda-Tech

the threads that helped with the diy

nfssaad (Saad Ahmed Khan) 2013-07-01 17:51:53 +0500 #4

pull out the rubber linings... be carefull not to tear any thing. use a blunt object

nfssaad (Saad Ahmed Khan) 2013-07-01 17:53:24 +0500 #5

u will need to remove the plastic trim on the door as well to allow the rubber to come out. its the plastic piece on each door which is in the center pillar of the car. it is held by 3 screws which can be removed easily... the rubber channels are tricky to remove and fit though..

nfssaad (Saad Ahmed Khan) 2013-07-01 17:54:55 +0500 #6

this clip came with the visor, with its own screw and it fits perfectly like any genuine part should

nfssaad (Saad Ahmed Khan) 2013-07-01 17:56:16 +0500 #7

2 such clips on the front door and one on the rear.

for the other clips you have to fit them to the door first and then fix the rubber seal. and then fit the visor.

nfssaad (Saad Ahmed Khan) 2013-07-01 17:57:20 +0500 #8

nfssaad (Saad Ahmed Khan) 2013-07-01 17:58:27 +0500 #9

fitted on two doors.. will do the rest in the morning...

the rivets do look a bit ugly but they are very very secure... i will paint them black later on...

nfssaad (Saad Ahmed Khan) 2013-07-01 18:02:32 +0500 #10

original honda

nfssaad (Saad Ahmed Khan) 2013-07-02 03:22:16 +0500 #11

should i update?

john0995 (john0995) 2013-07-02 03:53:38 +0500 #12

good work need updates:)

john0995 (john0995) 2013-07-02 03:54:45 +0500 #13

post some day time pics

nfssaad (Saad Ahmed Khan) 2013-07-04 12:27:41 +0500 #14

john0995 (john0995) 2013-07-04 13:58:25 +0500 #15

gud work brother

hamza_xeg (Hamza Sherazi) 2013-07-13 11:47:34 +0500 #16

nicely done

shariqak1 (shariqak1) 2013-08-08 21:21:08 +0500 #17

Good job saad..... and many many congratulations for the new caR finally!

talhabinomar (talhabinomar) 2013-08-09 03:13:45 +0500 #18

Nicely Done Sir jee.....

nfssaad (Saad Ahmed Khan) 2013-08-09 11:21:09 +0500 #19

actually this is not the new car,... we have had this for a long time now.. its my chachas car and he doesnt use it any more.