Generator Engine Overhauling & ATS Dedicated Thread ( Advice , DIY, Repair ,Install)

[car_bus2008]

I want to know will this generator run a 1ton AC and it is 2.4KVA.

[agoodfriend]

I want to know will this generator run a 1ton AC and it is 2.4KVA.

this generator is of 2000 Watt ,,,,,,,it cant run any split ac ,,,,,,,,,,,how much it cost you ,,,,,,,,,,,

[hanimughal]

wow.. thats amazing...
did u get my mail?

[hanimughal]

Mashallah.

[agoodfriend]

I want to know will this generator run a 1ton AC and it is 2.4KVA.

no electric start,,,,,,,,,,how will you start it on NG ,,,,,,,,it will be very hard to start this generator from recoil on NG

[car_bus2008]

this generator is of 2000 Watt ,,,,,,,it cant run any split ac ,,,,,,,,,,,how much it cost you ,,,,,,,,,,,

It costed me 30,000 and on NG it starts on 1st kick.And no problem till now it was running 12energy saver,4 Tubelight, 5 (100W Bulbs)

[agoodfriend]

It costed me 30,000 and on NG it starts on 1st kick.And no problem till now it was running 12energy saver,4 Tubelight, 5 (100W Bulbs)

expensive purchase,,,,,,,,,,,,,,,last week i check the prices of loincin with electric start , trolley with 4 wheels and a battery stand that can hold the car battery ,,,,,,,,,i make a deal in 31K without gaskit ,,,,,,,,and loincin is in chinese brands generators

[agoodfriend]

wow.. thats amazing...
did u get my mail?

yeah i check , but thats just a flow diagram not a circuit ,,,,,,,,,you need to use the circuit of stablizer for that purpose ,,,,,,,,you ever notice how stablizer switches its secandary winding connection when voltage drops ? ,,,,,,,,,batter work on that circuit,,,,,,,,,,,,

[car_bus2008]

expensive purchase,,,,,,,,,,,,,,,last week i check the prices of loincin with electric start , trolley with 4 wheels and a battery stand that can hold the car battery ,,,,,,,,,i make a deal in 31K without gaskit ,,,,,,,,and loincin is in chinese brands generators

Bro there was also a Loncin lying but i am not in the favour of electric start becoz its starter sometimes become faulty.And the main thing which i love of this generator is noise is less than others.

[hanimughal]

bro its a mechanical thing even if we use car they do get faulty too
and u can replace the parts ... anyways
every time light goes u have to go out pull the cable... u wont be able to put ATS or anything until its coil start you jus bought it u still got time to replace/change it with self start one...

[car_bus2008]

Is it possible to attach Electric Start on this generator without changing it.And what is ATS.

[amirhasan]

Bro there was also a Loncin lying but i am not in the favour of electric start becoz its starter sometimes become faulty.And the main thing which i love of this generator is noise is less than others.

bro that kick start will goes out of order even faster than electic starter motor

[hanimughal]

yea possible even iam turning my old loncin into electricstart i was asking agoodfriend about it and possible ways
you have to get the same size ring gear which fits on fly wheel and a starter motor
or a whole flywheel of same size which comes with magnets rest u can ask the GURU here...
but ur gen is new dont ruin it if possible change it ..

[car_bus2008]

Ok well thnx bro and i want to know what is ATS

[hanimughal]

automatic transfer switch with change over..
follow the thread from starting u will know... uploaded few pictures aswell
as soon as ur light goes off ur genny starts itself and with change ova it changes the load automatically on ur gen..

[ToxicDevil]

my generator leaks oil through valve cap and through the hose that joins it to the filter box. the filter box also has oil in it.

[dr3vil]

So Again i'm back yesterday i noticed oil dripping near Tappet cover where OHV is written last year i changed packing and it stayed for 9 months or so so i changed it again cost 15Rs but when i opened i noticed one Tappet is tight other is loose left one was tight right one was loose i need to adjust tappets but i have no gauge with me and is it a good way to seal the tappet cover with sealent we use in car engines
i have 3 things to do till saturday
1 Tappets
2 Solinied plz also tell me what mechs call it in their languge
3 NG kit race adjustment screw which u did so it would start on NG directly plus mine has 196cc engine how long flame would be good

[agoodfriend]

bro that kick start will goes out of order even faster than electic starter motor

very true , in my case the nylon thread wears off in just few days , i use it for just few days when its original battery of 11 amp died ,,,,later i replace the battery with 35 amp car battery which is still in use ,,,,,,,,

[agoodfriend]

my generator leaks oil through valve cap and through the hose that joins it to the filter box. the filter box also has oil in it.

thats the breather pipe , same as in cars which also connect with PVC valve ,,,,,,,,,,,,no solution for this problem you have to live with it ,

[agoodfriend]

So Again i'm back yesterday i noticed oil dripping near Tappet cover where OHV is written last year i changed packing and it stayed for 9 months or so so i changed it again cost 15Rs but when i opened i noticed one Tappet is tight other is loose left one was tight right one was loose i need to adjust tappets but i have no gauge with me and is it a good way to seal the tappet cover with sealent we use in car engines
i have 3 things to do till saturday
1 Tappets
2 Solinied plz also tell me what mechs call it in their languge
3 NG kit race adjustment screw which u did so it would start on NG directly plus mine has 196cc engine how long flame would be good

buy a feeler guage , it will cost you around 200 to 250 Rs ,,,,,,,,,,,,,well i suggest you save the pic of selenoid valve in cell phone and show it to the parts store ,,,,,,,,also try to tell him its function ,,,,,,,,,,,,,you can experiment on the flame adjustment , just start with 3 inch flame and go to about 6 inch ,,,,,,,,,,,