My Altis grande 2016 has some serious issue and needs some experts attention. I replaced my car axles complete, and tuned it(throttle cleaning, spark plugs replacement) at the same time. During replacement of axles some gear oil leaked. I being super cautious completely changed my gear oil aswell as per OEM Procedure provided by Dr Ali.
After doing everything i tried to calibrate cvt by doing the following Reset memory - Deceleration sensor zero point calibration - CVT calibration
Reset memory and deceleration sensor calibration was completed but cvt calibration failed (tried it more than 10 times)
Following happens now:
My car jerks while shifting gears
My car fails to downshift on coming to a complete stop. It is evident when i try to accelerate it from a complete stop the car would not gain speed as quickly as it should. Seems like car is jammed on 3-4 gear.
When i shift it to manual mode to drive it the car doesn’t obey the command and automatically shifts gears as the car speeds up despite me not shifting gears. Previously it would downshift itself but on upshift it would obey my command either through gear lever or paddle shifters.
I’m failing to figure out whats happening. Experts please see this. Your advices are highly appreciated.
