Grease

[Xulfiqar]

It uses taper in rear drums only, it will take any mp grease but pack it correctly and tighten it correctly too.

Tapers are not cranked down.

[asad1130]

Off topic now-
Sir we had kia classic in the past. Just a suggestion: check the cone as well . Ours was bend once and it had damaged many bearings. ... and overall this car damages Orignal size bearings too quickly because of high weight of the car. If possible try to do some alterations for bearings.

[nfssaad]

time is money.

besides, there are several prices of the same product on daraz from different sellers.

you pay a slightly higher price because you save fuel and time.

example, i bought a haier fridge from daraz, it shipped straight from haier factory and to my door step. i did not have visit several shops to find the lowest price, did not have to drive to local shops, did not have to arrange for suzuki pickup to transport the fridge etc etc.

[nfssaad]

theres a reason amazon has taken over a lot of business

[tintin1]

This post was flagged by the community and is temporarily hidden.

[Xulfiqar]

taper bearings can carry enormous amounts of load if setup and greased proper. They are not tightned with a tool, they are tightened by hand only and locked down by the castle nut retainer and cotter pin - The greasing is important, either use a bag to grease it or scoop the grease into the bearings - just like ancient cars.

And how was the cone bent?? - its a hardened item.

[asad1130]

Got these items via harris silicones fb message free COD https://m.facebook.com/HarrisSilicones/

3M Copper anti seize @ 1699 from lahore based https://autohub.pk/products/3m-copper-anti-seize-brake-lube

[tintin1]

This post was flagged by the community and is temporarily hidden.

[asad1130]

if someone wants to grab the required items of grease and silicone visit Mobil house, 7mart and Kohinoor on Brandreth Road, Lahore . this is what i have concluded from this group after reading all posts. but i guess i am ok with Harris and 3M paste that i have got via COD. Cant visit this location with ease . thanks

[asad1130]

silicone grease for caliber pins ? idk which one is the more preferred among both of them. i guess high vacuum ll b better.

[Xulfiqar]

The silicone grease is used for brake caliper servicing, while the antisieze is used on backer shims and ear edges of pads and also on brake shoes

[effaf27]

Sir can we apply a moly based grease like lm47 or molyslip 888 grease on the back of the pads and between shims. As with some brandnew shims i purchased form toyota there was a moly kote or molyslip dark moly based grease that came with it.

[Xulfiqar]

Lm47 is moly grease, not moly paste. Dont use it anywhere on brake

[syncview]

maybe moly grease can be used to increase brake pad life

[tintin1]

This post was flagged by the community and is temporarily hidden.

[Xulfiqar]

these are very basic working knowledge of lubes/greases. - Its 2019 - this information is available easily.

whats so special here?

and he came back to serve country? - so he donates all his earnings to FBR?

[tintin1]

This post was flagged by the community and is temporarily hidden.

[Xulfiqar]

BTW, he informed that there is new technology of “Liquid Titanium” which is introduced in the fluids and it amazingly helps for engine’s protection and fluids life too.

Liquid Titanium is being introduced in Grease too.

This is not new, it has been there since more than 15 years now, I believe infineon and conoco-phillips made that additive,

[effaf27]

Dear members

Kindly can someone guide me about where to get can i get some #46 compressor oil . Thanks in advance and apologies if the post seems off topic

[syncview]

denso nd8 is iso 46, you can get it from any good ac shop