Habib HB70 . Filler Guage Size of vavle are of 0.05mm or 0.08mm size.?

[abdulqadirkhan65]

Can anyone help me out is for 2012 Habib HB70 to adjust valve do we need 0.05mm or 0.08mm Filler Guage as it is euro 2 engine. because its really confusing some say it .05 and some says its .08 as euro 2 engine. expert advice is really needed.
many thanks in advance.

[asjdsm]

See if mentions anything in the manual?
If not set both to 0.05mm as that's the standard for most cHondaz.
Use able settings for few days then try 0.08.. See which one works bees for you.

Generally 0.05 should be sufficient.

[hamikhan]

Meray bhai app wo feeler gauge purchase krain jis kay numbers tarteeb say chal rahay hon means 0.05mm kay baad 0.06mm.0.07mm,0.08mm aana chaheiay

usually rocker arm aor valve tip kay darmeyan space increase krni perti hay oss key waja yay hoti hay k engine kay regular use key waja say cylinder mein rings piston loose hotay chlay jatay hain aor mostly intake valve say petrol ring piston key demand say zyda jana shoru ho jata hay jis ko app ics tarah key feeler gauge key madad say sahi tarah adjust krr sactay hain

Aor aik aor baat intake valve ko loose ya tight krnay kay baad her dafa mixture key bhi setting must hay verna engine say appko kabhi bhi sahi fuel average+performance nahin milay gee

[abdulqadirkhan65]

Many thanks for advice.

[abdulqadirkhan65]

many thanks for detail informative reply. already bought multi feeler gauge with 5 sizes.
i will give it try. but as you know very well this setting to be done on cold engine.but it will take some time to come to optimum condition between power and fuel consumption.
thanks again.

[hamikhan]

Welcome my brother i am here for help you can ask me for any kind of technical help