Heat up and Gasket Problem

[hassantahir2]

Islamabad/Rawalpindi

Sent from my SM-J700H using PW Forums mobile app

BTW Your car's radiator might be clogged or T.valve is not working right... Does your car have T.valve if yes then check its operation.? If that is working right.

Sent from my D2502 using PW Forums mobile app

[brainbird]

Thanks Buddy.. T.valve is removed earlier.. how can I check my radiator performance? Is it clogged or not?

Sent from my SM-J700H using PW Forums mobile app

[brainbird]

Please replace your radiator with Japanese brand. The problem will be solved. If you want assistance for a genuine one, I can help u in RWP.

Sent from my iPhone using PW Forums

Please assist.

Sent from my SM-J700H using PW Forums mobile app

[hassantahir2]

Please replace your radiator with Japanese brand. The problem will be solved. If you want assistance for a genuine one, I can help u in RWP.

Sent from my iPhone using PW Forums

A big No to Japanese Aluminum Radiators. Use Alwin or Loads Radiator Copper one's only.

Sent from my D2502 using PW Forums mobile app

[hassantahir2]

Thanks Buddy.. T.valve is removed earlier.. how can I check my radiator performance? Is it clogged or not?

Sent from my SM-J700H using PW Forums mobile app

The person who serviced your radiator could have told you about its condition..

Sent from my D2502 using PW Forums mobile app

[brainbird]

Ok..

Sent from my SM-J700H using PW Forums mobile app

[mughal1966]

+92 345 5321954
is contact No. of Mr. Aslam Radiator Wala having shop at Chah Sultan, Rawalpindi. Contact him and take your car to his shop. Your problem will definitely be solved.

Sent from my iPhone using PW Forums

[brainbird]

Any reason? Where are u from buddy?

Sent from my SM-J700H using PW Forums mobile app

[Mirza967]

go for whole cooling system flush........change water pump........and the most important thing ur head must not be warped and use new TTY bolts of head and torque them to correct specs......dont buy these bolts from scrap yard......find new one......they are a bit khuwari but are worth it.....then install thermostat valve and make fan auto.....

[brainbird]

go for whole cooling system flush........change water pump........and the most important thing ur head must not be warped and use new TTY bolts of head and torque them to correct specs......dont buy these bolts from scrap yard......find new one......they are a bit khuwari but are worth it.....then install thermostat valve and make fan auto.....

Im not technical. So please guide me in a simple words... find buddy

Sent from my SM-J700H using PW Forums mobile app

[Mirza967]

Im not technical. So please guide me in a simple words... find buddy

Sent from my SM-J700H using PW Forums mobile app

apni gari ki water body ko tabdeel krein.........head ko khradiya ko check krwayen k wo terha tou nae.....agr ha to wo us ko face krdy ga........aur jb b engine ka head khuly tou head k bolt change krein jo k hmary mechanic hazraat nae krty.....js se gaskit ka issue shuru o jata.....aur in bolts ko kabariye mtlb bilal gunj wgera se nae lena blky brand new istimaal krein......in sb me thori zalaalat ha mgr in the end faida o ga.......in sb aml k bad thermostat install krein aur engine ka pankha automatic krdein.......

[brainbird]

Ok bro.. Will replace new water body, install new bolts too. khradya wala kam b. My one friend said that may b head minor sa leak ho khein say... is it possible too? There is minor knocking type sound...very very minor when I push accelator.. camshaft ka issue ho skta hay according to my mechanic. Actualy once my car heated up and driven one whole day..

Sent from my SM-J700H using PW Forums mobile app

[Mirza967]

Ok bro.. Will replace new water body, install new bolts too. khradya wala kam b. My one friend said that may b head minor sa leak ho khein say... is it possible too? There is minor knocking type sound...very very minor when I push accelator.. camshaft ka issue ho skta hay according to my mechanic. Actualy once my car heated up and driven one whole day.. 

Sent from my SM-J700H using PW Forums mobile app

wo head leak wala issue b khradia dekh ley ga.....and about knocking sound its ok if car is on petrol.....camshaft can be seen visually for wear.....but this is very less related tooverheating......but its common is this engine to wear camshaft if new advanced oils of api sm or sn are used due to low zddp

[brainbird]

Ok.. will do it all you recommended Inshallah. Hope all will be ok. Any advice for camshaft issue? Ya abhi isay rehnay don?

Sent from my SM-J700H using PW Forums mobile app

[Mirza967]

Ok.. will do it all you recommended Inshallah. Hope all will be ok. Any advice for camshaft issue? Ya abhi isay rehnay don?

Sent from my SM-J700H using PW Forums mobile app

dnt worry thousands of engines are built everyday......and about camshaft.....show it to khradia he will check lobe height and lobe wear and straightness of camshaft......if cam is worn then install new and use api sg,sj oils....they r cheap and beneficial to this engine.

[brainbird]

Thanks a lot.. Will.update u too

Sent from my SM-J700H using PW Forums mobile app

[brainbird]

Is it any timing issue or tapet setting also for over heating? Sorry to bother you again buddy. Called Suzuki Parts shop, the price of water body is 1400 or should i buy locally from some reputed spare part shop? And what about head gasket? This time i wanna buy my parts myself rather than depending upon my mechanic. Thnx

[brainbird]

After the last repair and new gasket, my car well performed locally, i drove almost 400 km, the max drive was 100 km on AC. Heated up when i was on the way to Faisalabad, i went non stop from Islamabad to Faisalabad with very low Ac. Set it off also in salt range too.

[Mirza967]

After the last repair and new gasket, my car well performed locally, i drove almost 400 km, the max drive was 100 km on AC. Heated up when i was on the way to Faisalabad, i went non stop from Islamabad to Faisalabad with very low Ac. Set it off also in salt range too.

u can buy gmb water body from any good reputable parts store.....suzuki parts are expensive widout any reason......tappet setting can cause if headgasket is weak and head z warped or cracked.....st tappet to 0.15mm on cold engine and timing can be checked by any mechanic.......plz buy parts urself and put eye upon mechanic....these mechs r thugs.so dnt rely on them

[saboor73]