Heating light is blinking

sohmee.ali (sohmee.ali) 2021-01-16 20:02:16 +0500 #1

Sir, i have Honda City 2005, Its RED Temp light is blinking, i have change Gasket and thermostat. also clean radiator and fan is also directed, but even though water is reducing and RED Temp light is sometime blinking. After that thermostat wolve are directed and Temp sensor also changed then GREEN Temp light is always ON and RPM is 1300. Anyone can guide what the possibility.

flyingfeather (flyingfeather) 2021-01-16 20:10:32 +0500 #2

Get it reset with help of a scanner and subsequently it should be fine. Get the thermostat instaeed and fan on auto.

sohmee.ali (sohmee.ali) 2021-01-17 12:38:39 +0500 #3

before RED Temp light was almost ON or Blinking but after they have directed thermostat vovle so after that Green Temp light always ON even after 30 min drive. please guide because i m worried about it. thanks

askai37 (askai37) 2021-01-17 13:18:57 +0500 #4

temp sensor faulty. short temp sensor (connector one) wire with body ground and see if red light comes. that confirm faulty temp sensor.

sohmee.ali (sohmee.ali) 2021-01-18 19:06:53 +0500 #5

Let me check it also .. thanks to all for support and reply

hash4u (hash4u) 2021-01-18 23:39:45 +0500 #6

its winters
with direct fan and no valve
u r running ur car cold all the time
will eventually kill the engine

if the gasket job was done right and block is ok.fan should be set to auto and valve installed back