Help needed-honda city 2007

Tags: #<Tag:0x007f7309545b90>

CarAddict (CarAddict) 2011-06-06 17:06:23 +0500 #1

Salam, i recently bought a used honda city 06/07 model . A light is shown in its speedo meter with a caution sign as shown in first pic. Its shown when i turn on the keys and stays until i start the engine. Is this ok ? whats this ligth for ?
Also what does the 'h' and 'c' temperature lights show as in pic 2.
One more thing , driver side door window comes down smoothly but when i try to get it up it gets stuck at middle and after little pressing and pulling it goes up. what could be the problem?

CarAddict (CarAddict) 2011-06-07 05:42:00 +0500 #2

Salam,

ANYONE ?????

haroon47 (haroon47) 2011-06-07 05:51:29 +0500 #3

first of all congratualtions on purchasing the new car.pls do share the day light pics and price of it as im also looking for this model.regarding the first pic as far as i know its eps light.when you switch on the inginition for starting the car this light will blink for few seconds.its normal....but if it keeps on blinking during the driving too then its not normal you need to get it checked from the mechanic.
regarding the "h" and "c"lights these are for temperautre.you might have noticed that cities lack in temperautre guages....so when you start you car "c" light will switch on for a while unless and untill your car gets heatedup.......God forbid if you car gets overheated then "h" sign will blink alerting you to stop over as your car is getting heatedup.Hopefully it will work...

bango (bango) 2011-06-07 05:58:02 +0500 #4

And you can spray WD40 in the window channel and it'll roll smooth. Remember, it's a temp solution, make sure you do it at night or when you're not planning to drive the car/expose it to dust.

CarAddict (CarAddict) 2011-06-07 06:28:09 +0500 #5

Salam,
@haroon , thanks man. EPS light doesnot blink rather its static . Its shown when i turn on the keys and goes out when give the ignition and is not shown during running. Is it normal for it to show when i turn on the keys but engine is not running?
as for the car and price. its 2008 city manual petrol and i got it for 1100000.
@bango, do i have to open the internal door cover to access the channel or is there anyother way ?

bango (bango) 2011-06-07 06:37:17 +0500 #6

No you don't have to open anything. Just roll down the window and spray a little in the channels on both sides (the slit in which window runs). Wd40 comes with a thin nozzle to make it easy.

Here's a ref pic.

talhawaleed (talhawaleed) 2011-06-07 06:41:36 +0500 #7

Only problem I find with this car is absence of proper temperature indicator, you would never know if engine temperature is towards high side or towards low side until it reaches the maximum limit.

CarAddict (CarAddict) 2011-06-08 02:53:09 +0500 #8

salam,
@bango , thanks bro.

umair.nisarmalik (Umair Nisar ) 2020-09-11 18:17:42 +0500 #9

Yes bro. I have the same model. It's steering control light when it's motor gets starts it gets switched off and that happens after you start the engine. If it remains switched ON even after the start of engine then go to mechanic with computer ,he will remove the error of your car software. Moreover, the Heat light is final indicator which turned ON when the car gets overheated so if you ever come across such situation immediately stops your car and try to check your radiator because sometimes radiator can choked.